goodbye t56 hello 200r4
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Jan 2003
Posts: 1,104
Likes: 0
From: minneapolis,mn
goodbye t56 hello 200r4 Well I have offically gone soft,after abusing my 12 bolt last time I am now
changing to auto.I bought the setup from a board member here ,and it was
built by Century transmission with the good parts and a transbrake.Should
leave ok with a 3600 converter a 275 low gear and 430's in the rear.Lots
of learning to do as I haven't raced a auto since 1976.I'm gona keep the
t56 around in case this thing bores me to tears.Any tips you can share
will be appreciated.I have no clue what shifter to run.
changing to auto.I bought the setup from a board member here ,and it was
built by Century transmission with the good parts and a transbrake.Should
leave ok with a 3600 converter a 275 low gear and 430's in the rear.Lots
of learning to do as I haven't raced a auto since 1976.I'm gona keep the
t56 around in case this thing bores me to tears.Any tips you can share
will be appreciated.I have no clue what shifter to run.
FormerVendor
Joined: Oct 2006
Posts: 3,123
Likes: 3
From: D-F/W
Well I have offically gone soft,after abusing my 12 bolt last time I am now
changing to auto.I bought the setup from a board member here ,and it was
built by Century transmission with the good parts and a transbrake.Should
leave ok with a 3600 converter a 275 low gear and 430's in the rear.Lots
of learning to do as I haven't raced a auto since 1976.I'm gona keep the
t56 around in case this thing bores me to tears.Any tips you can share
will be appreciated.I have no clue what shifter to run.
changing to auto.I bought the setup from a board member here ,and it was
built by Century transmission with the good parts and a transbrake.Should
leave ok with a 3600 converter a 275 low gear and 430's in the rear.Lots
of learning to do as I haven't raced a auto since 1976.I'm gona keep the
t56 around in case this thing bores me to tears.Any tips you can share
will be appreciated.I have no clue what shifter to run.
I like the B&M Pro Ratchet... pn 80842. We have installed several this year and all of the guys we do that for love it.
Happy Holidays!
g
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo FormerVendor
Joined: Oct 2006
Posts: 3,123
Likes: 3
From: D-F/W
Oh yeah... it's all good Vinnie!
We are fortunate to be able to get test hits in most every month of the year. Which means we break **** all year long... LOLOLOL!
Oh... and one other thing, I just finished grilling some Pork Chops on the grill outside! A little chilly, needed a windbreaker and my sneakers. But not too cold to drink a cold beer and hang around outside.
g
We are fortunate to be able to get test hits in most every month of the year. Which means we break **** all year long... LOLOLOL!
Oh... and one other thing, I just finished grilling some Pork Chops on the grill outside! A little chilly, needed a windbreaker and my sneakers. But not too cold to drink a cold beer and hang around outside.
g
When it gets back up to 30* the grill can come back out of the garage. 
You will have a good time with that tranny Mike Kurtz the owner of Century Transmissions is a longtime friend of mine and does very good work!
do you have a trans brake in there?
i like the B&M pro stick,the hammer is not bad either..
do you have a trans brake in there?
i like the B&M pro stick,the hammer is not bad either..
