LS1TECH - Camaro and Firebird Forum Discussion
CHASSIS, SUSPENSION, APPEARANCE
Automatic Transmission
TH400/TH350 users

Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits

Sponsored by:

TH400/TH350 users

Reply Subscribe

Search this Thread

Old

Jul 1, 2003 | 09:24 PM

#1

Thread Starter

TECH Junkie

iTrader: (19)

Joined: Nov 2001

Posts: 3,337

Likes: 2

From: My house

Default

TH400/TH350 users

How many are using the adaptor plate, and how many are just bolting it right up to the block? If you are bolting it right up to the block, you are just missing the very top bolt in the bellhousing, correct? but everything else lines up? Thanks

Chris

Old

Jul 2, 2003 | 02:02 AM

#2

Launching!

iTrader: (1)

Joined: Jul 2002

Posts: 228

Likes: 0

From: Springfield, Illinois

Default

Re: TH400/TH350 users

I would like to know this info also.

Old

Jul 2, 2003 | 11:21 AM

#3

TECH Enthusiast

iTrader: (5)

Joined: Nov 2001

Posts: 551

Likes: 0

From: Orlando, FL

Default

Re: TH400/TH350 users

I have a TH400 and I just bolted it straight up. And you are correct on the top hole not lining up. So there are 5 bolts instead of 6 and It's still plenty strong.

Will

Old

Jul 2, 2003 | 01:16 PM

#4

SSU Moderator

Joined: Nov 2001

Posts: 4,857

Likes: 0

From: Austin, TX

Default

Re: TH400/TH350 users

JW will make you a bellhousing to bolt up.

Old

Jul 2, 2003 | 03:01 PM

#5

TECH Fanatic

Joined: Nov 2001

Posts: 1,055

Likes: 0

From: Chi-Town

Default

Re: TH400/TH350 users

chris trust me......just bolt it up. 1 less bolt isn't going to be an issue

Old

Jul 2, 2003 | 05:09 PM

#6

Thread Starter

TECH Junkie

iTrader: (19)

Joined: Nov 2001

Posts: 3,337

Likes: 2

From: My house

Default

Re: TH400/TH350 users

thanks jimmy. i wasn't worried at all, just wanted to make sure the info i remembered in my head was correct

Old

Jul 2, 2003 | 07:21 PM

#7

Launching!

Joined: Nov 2001

Posts: 299

Likes: 0

From: Savannah, TN

Default

Re: TH400/TH350 users

Mine bolted right up and is not using the top bolt.

Trending Topics

418 Stroker Build

7

321
Engine damage diagnosing

64

3.1k
Trans cooler updated information

6

166
Cylinder leak down higher on one

11

375
Piston rings & gaps for low boost and cylinder finish?

5

243

Old

Jul 3, 2003 | 01:13 PM

#8

TECH Fanatic

iTrader: (1)

Joined: Mar 2002

Posts: 1,500

Likes: 0

From: Bellevue, Nebraska

Default

Re: TH400/TH350 users

Get some ARP fastners if your worried. Jegs has them for about $50. They can take about anything from what I'm told.

LS1 Tech Stories

The Best V8 Stories One Small Block at Time

6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Brett Foote

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Reply Subscribe

bolt, missing, th400, top

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 07:16 PM.