deep trans pan ?
Its helpfull in added fluid capacity, I like the OEM deep truck pan best myself
__________________
Launching!
Joined: Jan 2003
Posts: 218
Likes: 0
From: NV
I have had the TCI and now have the B&M cast aluminum pan. Both are good pieces. Just remember when you go with any deep trans pan, to also go with the longer pick up kit. Good luck with whatever you choose, more fluid is always better. 
Trending Topics
Launching!
Joined: Jan 2003
Posts: 218
Likes: 0
From: NV
If you put one on a car lower than stock, go for the steel one, at least it will bend.
You are only going to whack a cast aluminum one on a speed bump once real hard. That will be a horrble mess. Do some measuring.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Go with the OEM truck pan. You don't have alot of weight because it is a stamped steel pan. I think the theory is that it adds volume to the system and therefore enhances cooling of providing more transmission fluid.
Then again you could go with a transmission cooler and the extra capacity needed for the lines, hardware would be another way of increasing the capacity and get real cooling because you'd have to add more fluid to the system.
Then again you could go with a transmission cooler and the extra capacity needed for the lines, hardware would be another way of increasing the capacity and get real cooling because you'd have to add more fluid to the system.
