Anyone have the CCW SP600s?
12-25-2010, 02:15 PM
#6
Launching!
Join Date: Sep 2009
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
I have SP-600s on my V1.19"X9" --- Front w/255x40x19 Ventus V12 Hankook
19"X10" -- Rear w/285x35x19 Ventus V12 Hankook
You can see my car, my truck, & my lawn mower, all made in the USA, on CCW's web site.The car looks better in reality . . too much reflection in picture.
Trending Topics
12-26-2010, 09:07 AM
#10
Launching!
Join Date: Sep 2009
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
No Mods to Fit.
When I bought them from John at CCW, I told him that I wanted the maximum size wheel/tire combo.
John was instrumental in the developement of wheels for the very 1st V's. He recommeded one width size smaller, front & back, but said that the combo I chose would be dependant on the tire mfg's spec, as not all tires have exact width for a given size.
I was pretty sure the back would fit, (little fingers width between tire & control arm) but I was worried about the front.
Needless too say, I do not ride with two big 'samoans' in the back seat. 'Inside Joke'.
I chose these sizes because, I wanted maximum width with a diameter as close to stock as possible. A little more/not less diameter.
Too date, no rubbing front or back. Smoother ride & better handling than 'run flats'.
When I bought them from John at CCW, I told him that I wanted the maximum size wheel/tire combo.
John was instrumental in the developement of wheels for the very 1st V's. He recommeded one width size smaller, front & back, but said that the combo I chose would be dependant on the tire mfg's spec, as not all tires have exact width for a given size.I was pretty sure the back would fit, (little fingers width between tire & control arm) but I was worried about the front.
Needless too say, I do not ride with two big 'samoans' in the back seat. 'Inside Joke'.
I chose these sizes because, I wanted maximum width with a diameter as close to stock as possible. A little more/not less diameter.
Too date, no rubbing front or back. Smoother ride & better handling than 'run flats'.
12-26-2010, 02:07 PM
#12
Launching!
Join Date: Sep 2009
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
home of East Coast Supercharging.
