Forgestar F14 Wheels Entering Production (6x115 - FINALLY!)
12-04-2012 | 11:24 AM
#601
I've never cared for the transformer look on any badges, so if it were up to me, I'd stick with the forgestar center caps first, then the stockers depending on how easy they can be utilized. Although, your car is super clean and makes me want yellow calipers.
12-04-2012 | 11:47 AM
#602
Thanks!! I love my yellow calipers!!
I sorta have the Decepticon theme on my car with the GM badges = Decepticaon badges.
See pic:
I sorta have the Decepticon theme on my car with the GM badges = Decepticaon badges.
See pic:
12-05-2012 | 03:47 PM
#603
Staging Lane
Joined: Sep 2012
Posts: 59
Likes: 0
They are the black ones. The borders are still grey, so you have to deal with that on your own if you want to make them black. I'll probably have mine professionally painted black when I get my Extreme Composites hood painted. Oh, and btw, I contacted the manufacturer of the headlamps and they will not consider making the borders black.
12-05-2012 | 03:52 PM
#604
Staging Lane
Joined: Sep 2012
Posts: 59
Likes: 0
Well went ahead and ordered a set of the black housing halo headlights today, as much as I used to be against them, after seeing the pictures of Fuzzys car and one other I decided I'll give them a try. Only 30 more than stockers and have an HID set included. My headlights might be up for sale in the near future, but the passenger lens has a crack in it and both housings are in bad shape. Plus the passenger side ballast is out so it was just one more reason for some new lights.
With the new ones in, I'll be going for this look.
With the new ones in, I'll be going for this look.
12-05-2012 | 06:03 PM
#605
Not off of the top of my head, I don't. I don't believe there are more than one type that are the black housing, dual halo setup. As far as conversions, no. I had to wire in the HID setup, but my plug fit the housing, just have to cut and splice in the +12v power and the ground.
12-20-2012 | 11:00 AM
#607
What tire pressure do you all have in your F14's? Hankooks specifically
The Hankooks have a higher max psi than stock tires so you cant really use the "sticker" on the door jam. Or can you?
My tire sizes are:
245-40-19
285-35-19
thanks!!
The Hankooks have a higher max psi than stock tires so you cant really use the "sticker" on the door jam. Or can you?
My tire sizes are:
245-40-19
285-35-19
thanks!!
12-20-2012 | 12:49 PM
#609
Teching In
Joined: Dec 2012
Posts: 4
Likes: 0
From: york, ne
just talked to them and put in an order for blacks f14s. they have the parts and 4-6 weeks out assembled. any thoughts on having the rears made 44 or 45 mm offset rather than 42? lowered with d2 coil overs and don't want to rub on quarter lip. i know linea crappas have 47 and known to rub on inside.
12-25-2012 | 09:53 PM
#611
Teching In
Joined: Sep 2012
Posts: 11
Likes: 0
From: Gainesville Ga
I bought a set of Kuhmo tires in the size recommended , i was having some scrubbing issues, i had the fenders rolled problem solved.
I also put on a set of KW varient 3 coilovers, Had bought a set of H&r coilsprings , way too soft , that's when i bought the KW's.
I also put on a set of KW varient 3 coilovers, Had bought a set of H&r coilsprings , way too soft , that's when i bought the KW's.
12-26-2012 | 07:16 AM
#612
TECH Resident
Joined: Mar 2012
Posts: 796
Likes: 0
From: Florida
I too have the KW's(no f14's yet), just curious what your front fender height is at the top of the arch? Mine's 25 3/4 inches.
01-09-2013 | 02:16 PM
#614
Teching In
Joined: Dec 2012
Posts: 47
Likes: 0
I apologize if it has been answered already in this thread, what is the recommended tire size for the 19x9 and 19x10 when lowered on H&R Springs? Do I need to get my fenders rolled or pulled?
Does anyone know if these available to ship out immediately? Thanks!
Does anyone know if these available to ship out immediately? Thanks!
01-09-2013 | 04:25 PM
#615
On The Tree
Joined: Oct 2012
Posts: 136
Likes: 0
From: Kennesaw, GA
According to UPS mine will be dropped off tomorrow
01-19-2013 | 12:15 PM
#618
Teching In
Joined: Dec 2012
Posts: 47
Likes: 0
So like what was said before in this thread, be prepared to add two weeks to whatever time frame you are quoted. I am in no rush but was quoted 1.5-2 weeks from Pete at Forgestar and my order status says 4 weeks. I can't wait to get them!
