911ss

iTrader: (9)

i got a hsw dual nozzle kit on the way and was wondering where i should start off putting the 2 nozzles at on the intake tube?

nikon

iTrader: (2)

someone else just finished installing a kit, single nozzle I think though.....they put it on the back side of the air box.

JonCR96Z

iTrader: (33)

You can't spray a wet shot through the MAF like the one the Nikon mentioned. Try to get it right in front of the TB so that it sprays directly into the intake.

MCasano1

I wouldn't spray before the elbow. I'd invest in a NX throttle body kit and spray into the intake...like JonCR96Z said.

911ss

iTrader: (9)

lol let me be more clear, im not new to nitrous, well wet nitrous. the kit is a dual dry, i know to spray before the maf but more important was where is your nozzle located and do you have any issues.

MCasano1

I've used a dry kit before - on an F-body. Dry kits are great ideas. However, I wouldn't use a dry kit on the V becuase of the maf location and the elbow. I'd worry about puddling in that elbow or freezing the maf. I'd just get a wet kit.

911ss

iTrader: (9)

Where did you guys run the wires through to get from the engine bay to the cabin?

MCasano1

It's a pain in the azz. I took out the battery, battery box and some of the molding and went through the firewall behind the glove box.