Where to begin...
#41
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Good timing--I just added the FIPK and put my car on the dyno today. It was a dynojet (I don't want to get into accuracy vs. Mustang; I'm not after any sort of bragging rights, but this was the closest dyno to me). Anyway, the car baselined at 348.3 hp at 6100 rpm and 338.0 lb-ft at 4800 rpm. We installed the FIPK on the dyno (it turned out the previous owner had added a K&N panel filter in the stock housing, for whatever that's worth) and afterward it pulled 356.9 hp and 343.6 lb-ft at the same rpm as the baseline pull.
You talking about what I just installed? Loud enough to notice a difference.
#44
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
I've got the B&M, UUC bushings, and that GTO/Monaro boot/**** on it's way. After that I'm probably gonna tinker with the exhaust. Maybe a custom job with reduced crap and more Magnaflow.
#47
On The Tree
iTrader: (2)
Join Date: Oct 2007
Location: Dallas, TX
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
i was supposed to get my B&M last friday but UPS misrouted the package and it is a week delayed!! got my UUC bushings sitting right here.
Next mod will most likely be intake followed by a ported TB and lightened flywheel new clutch combo. After that I will get it tuned.
Next mod will most likely be intake followed by a ported TB and lightened flywheel new clutch combo. After that I will get it tuned.
#57
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
B&M shifter came from Atlantic Speed. $200 (eBay auction)
http://www.atlanticspeed.com/
UUC bushings (2) $35(?) Call the parts Dept. they have them in stock.
http://www.lindsaycadillac.com/
Shift **** and boot
http://www.ebay.com/
You might not be able to find the **** and boot but keep looking. There's a place in Australia that sells them but I'm not sure who or how much.
http://www.atlanticspeed.com/
UUC bushings (2) $35(?) Call the parts Dept. they have them in stock.
http://www.lindsaycadillac.com/
Shift **** and boot
http://www.ebay.com/
You might not be able to find the **** and boot but keep looking. There's a place in Australia that sells them but I'm not sure who or how much.
#58
TECH Fanatic
iTrader: (17)
Join Date: Feb 2004
Location: Little Elm, TX
Posts: 1,501
Likes: 0
Received 0 Likes
on
0 Posts
B&M shifter came from Atlantic Speed. $200 (eBay auction)
http://www.atlanticspeed.com/
UUC bushings (2) $35(?) Call the parts Dept. they have them in stock.
http://www.lindsaycadillac.com/
Shift **** and boot
http://www.ebay.com/
You might not be able to find the **** and boot but keep looking. There's a place in Australia that sells them but I'm not sure who or how much.
http://www.atlanticspeed.com/
UUC bushings (2) $35(?) Call the parts Dept. they have them in stock.
http://www.lindsaycadillac.com/
Shift **** and boot
http://www.ebay.com/
You might not be able to find the **** and boot but keep looking. There's a place in Australia that sells them but I'm not sure who or how much.