LETZRIDE

iTrader: (6)

My LSA is 113, I don't think you'll have a problem passing your with a tune...ESPECIALLY with the new emissions, but even if you had to go through the sniffer I bet you could still pass it.

One thing I never tried was adding ehtanol/methanol to the gas to make it burn a little cleaner.

Remember, I have a 3800 to, so my cam is massive for the tiny motor that I have.

Mat

Any shops near Waterloo Ontario running the new plug-in test?

Mat

Well at least I know one in Missisauga that is!

tsench

iTrader: (15)

i know there are couple shop already have it in mississauga

ralfmotorsp\orts

I know this is an old thread, but the date is getting closer, why do they need pictures of the car? and what happens to my 6.0l swapped s10 in this scenario?

flame

iTrader: (13)

Pictures are to prevent fraud. What year is the truck? I haven't heard what is going to happen with the hotrod status in the new testing.

ralfmotorsp\orts

the truck is a 99

flame

iTrader: (13)

Your truck VIN will have to be correct in the pcm and the readiness monitors will need to have run and passed. Here is how to set the pcm up to pass the readiness test if you don't have all the required sensors. https://ls1tech.com/forums/pcm-diagn...or-issues.html

jeff sheehan

I just purchased a 96 TA with a few mods and cant get through emissions,(EGR and catalyst not ready reading) . Is there a way to pass this test without buying and installing these parts?

flame

iTrader: (13)

If it fails the new system at this point they run it the old way on the rollers so I take it that it failed the dyno test. I'm not sure if the 96-97 tuning software can get it to set the monitors or not. Is the car stock?

LS1Zedder

Oil changers on Victoria st is. I went there and passed with flying colours!!!

Christmas comes early!!!

ralfmotorsp\orts

I understand changing my vin in the ecm for my truck to pass. how does the cvn test work for this though?

cam

iTrader: (9)

http://www.wheels.ca/news/drive-clea...ts-usefulness/