Going to part out my COMPLETE 98 Z-28 6spd 383 lunati stroker
#1
Going to part out my COMPLETE 98 Z-28 6spd 383 lunati stroker
Complete car in Montreal. I had to take the motor right down because of a bad reluctor wheel but mototr was otherwise mint. I don't have the time or energy to put it back together.This car ran 11.47 at 123.5 with a 4500rpm launch. LOADS of high perfomance parts. I am listing here because I don't want to ship across the border if i don't have to. Would much prefer local pickup for the heavier stuff. I had a thread going in parts and landed up with about 25 PMs. Please don't PM me, I am not visiting the site much because I am very occupied with my recording studio. Please email me at stevensegal@videotron.ca or call me at 514-894-4338
Here is a partial list:
1) SLP oversized radiator
2) MTI air filter lid
3) Greddy catch can
4) Ported throttle body
5) K&N air filter
6) Lunati 383 stroker kit, EA035-383
7) Arp 12 point head stud kit
8) Arp 12 point main studs
9) 2002 LS6 block and valley cover, oil pan and all other covers.
10) Rollmaster double timing chain w/ Torrington bearing
11) Comp Cams 242/242 113+4
12) Patriot stage 2.5 heads with crower double springs 2.02/1.57 milled . 030”
13) Yellow Terra 1.7 Roller rockers
14) Kooks stainless 1 7/8” headers
15) Ktech ported & shimmed oil pump
16) Magnaflow stainless catback
17) LS6 intake
18) Strange 12 bolt diff with super posi and 3.73 gears
19) SLP linelock
20) Short shifter
21 Brand new SPEC stage 3 plus with 22lb. billet flywheel 500miles. Just broken in. install and rip away!
Here is a partial list:
1) SLP oversized radiator
2) MTI air filter lid
3) Greddy catch can
4) Ported throttle body
5) K&N air filter
6) Lunati 383 stroker kit, EA035-383
7) Arp 12 point head stud kit
8) Arp 12 point main studs
9) 2002 LS6 block and valley cover, oil pan and all other covers.
10) Rollmaster double timing chain w/ Torrington bearing
11) Comp Cams 242/242 113+4
12) Patriot stage 2.5 heads with crower double springs 2.02/1.57 milled . 030”
13) Yellow Terra 1.7 Roller rockers
14) Kooks stainless 1 7/8” headers
15) Ktech ported & shimmed oil pump
16) Magnaflow stainless catback
17) LS6 intake
18) Strange 12 bolt diff with super posi and 3.73 gears
19) SLP linelock
20) Short shifter
21 Brand new SPEC stage 3 plus with 22lb. billet flywheel 500miles. Just broken in. install and rip away!
Last edited by StevieZ; 03-04-2008 at 07:51 AM.
Trending Topics
#13
Guys, I've been trying to break the ice by selling the rotating assembly and it doesn't seem like it's going to sell even at less than 1/2 price new so I am thinking that I may land up be stuck with a bunch of parts and a shell. At this point I am thinking I will buy a new reluctor wheel, bearings and rings and put the car back together and sell it as a complete car. If something changes, I'll re-post.
#14
10 Second Club
iTrader: (2)
Join Date: Oct 2005
Location: Toronto Canada
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
track opens 4 weeks today!!!
I cant wait to get out there.
I am running the same combo that I ran at the end of last year.I took out about 100 more lbs and with a good 60ft and good ait I am hoping for a 10.39
how about you guys lets hear em
I am running the same combo that I ran at the end of last year.I took out about 100 more lbs and with a good 60ft and good ait I am hoping for a 10.39
how about you guys lets hear em