New Intakes?
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
New Intakes?
Anyone hear of anything new in the carbed intake department.The G.M dual plane is still way expensive and the victor junior is the only single plane.Holley was showing pic's and edelbrock was coming out with a full line of L-92 stuff.Where is it I may ask???
#3
TECH Senior Member
iTrader: (127)
i would like to see a rectangle port super vic.
as of now, i think only the gm single plane is available for rectangle port heads.
where the hell is pro products?? they got copies of pretty much every sbc/sbf manifolds.
but no ls manifolds.
there missing out on huge emerging market imo
as of now, i think only the gm single plane is available for rectangle port heads.
where the hell is pro products?? they got copies of pretty much every sbc/sbf manifolds.
but no ls manifolds.
there missing out on huge emerging market imo
#6
In-Zane Moderator
iTrader: (25)
Pretty shitty, cheapest Ebay single plain for the L92s i saw was 411$, i SWEAR i saw a Edelbrock intake for cheaper, but it was probably late and it has been a while, so it was probably just me.
They are working on it, actually, they are supposed to drop the first quarter if my source is correct. I volunteered my car as a test car if they needed it.
They are working on it, actually, they are supposed to drop the first quarter if my source is correct. I volunteered my car as a test car if they needed it.
#7
edelbrock l92 victor jr
I am about to buy an edelbrock vic. jr. for my 6.0 with LS3 heads. So far my research shows part # 28457 to be a carb manifold,meaning no pre- drilled injector bosses, for l92/ls3 heads.A big problem I have found: many places carry these but they are labled as "LS1" I found it for 268.02$ and12.00$ shipping to washington state.
Trending Topics
#11
TECH Enthusiast
iTrader: (7)
Pretty shitty, cheapest Ebay single plain for the L92s i saw was 411$, i SWEAR i saw a Edelbrock intake for cheaper, but it was probably late and it has been a while, so it was probably just me.
They are working on it, actually, they are supposed to drop the first quarter if my source is correct. I volunteered my car as a test car if they needed it.
They are working on it, actually, they are supposed to drop the first quarter if my source is correct. I volunteered my car as a test car if they needed it.
#13
TECH Enthusiast
iTrader: (7)
i would like to see a rectangle port super vic.
as of now, i think only the gm single plane is available for rectangle port heads.
where the hell is pro products?? they got copies of pretty much every sbc/sbf manifolds.
but no ls manifolds.
there missing out on huge emerging market imo
as of now, i think only the gm single plane is available for rectangle port heads.
where the hell is pro products?? they got copies of pretty much every sbc/sbf manifolds.
but no ls manifolds.
there missing out on huge emerging market imo
#14
GMPP L92 vs Edelb. Vic jr. testing?
I run the GM manifold and im curious.
#15
10 Second Club
iTrader: (4)
Join Date: Jan 2004
Location: Martin Mi
Posts: 1,068
Likes: 0
Received 0 Likes
on
0 Posts
According to people ive talked to the Edelbrock vic jr is suppose to make more power than the Gm intake, but ive yet to see dyno comparisons. Id be interested to see that also. Along with another test of the two ported by the same porter. Heck, lets even throw a single plane into the mix. That would be a good article. Eric L
#16
According to people ive talked to the Edelbrock vic jr is suppose to make more power than the Gm intake, but ive yet to see dyno comparisons. Id be interested to see that also. Along with another test of the two ported by the same porter. Heck, lets even throw a single plane into the mix. That would be a good article. Eric L
#19
Old School Heavy
iTrader: (16)
http://www.popularhotrodding.com/eng...nge/index.html
Here is the page that engine is on:
http://www.popularhotrodding.com/eng...nge/gm_ls.html
Here is the page that engine is on:
http://www.popularhotrodding.com/eng...nge/gm_ls.html
Last edited by speedtigger; 02-02-2011 at 07:55 PM.
#20
i would like to see a rectangle port super vic.
as of now, i think only the gm single plane is available for rectangle port heads.
where the hell is pro products?? they got copies of pretty much every sbc/sbf manifolds.
but no ls manifolds.
there missing out on huge emerging market imo
as of now, i think only the gm single plane is available for rectangle port heads.
where the hell is pro products?? they got copies of pretty much every sbc/sbf manifolds.
but no ls manifolds.
there missing out on huge emerging market imo