streetknight2

iTrader: (10)

Just wondering, would like to see how some have done regulators, radiator hoses, water pump, etc.

Thanks

1994t/a

LS1 water pump and alternator/bracket.LS1 camaro upper and lower radiator hoses.


Before i got the radiator and hoses in place.Mounted the fuel pressure reg on the fire wall.

johnyrrr

iTrader: (2)

Napa top hose and AutoZone bottom hose with All Star performance Radiator.

streetknight2

iTrader: (10)

which radiator did you use?

menchaca

iTrader: (1)

I used a stock f body radiator and stock f body hoses in my mustang.

streetknight2

iTrader: (10)

On alternator, did you convert to 1 wire or what?

xpndbl3

iTrader: (23)

Can't mount the regulator to the firewall per nhra rules if you plan on racing it ever it won't pass tech.

butler

This is with the 383 ls1. It got cleaned up when I put the lq9 in it.

richard david

Has anyone been able to use stock hood with a victor Jr. And if so what oilpan and k member to use

S10xGN

iTrader: (11)

No offense, but it looks like a disgruntled assembly line worker took a 12 gauge loaded with #2 shot to work that day... WTF is with all those holes? Bracket mounts? More airflow for cooling? A place for all the oil to leak out of? <J/K> I know it's not on you!

bluecajun5.3

iTrader: (31)

truck l92 water pump, summit sfi balancer, truck radiator hoses, used radiator that came with the car as a roller. these are last Oct pics, has an alternator now with truck bracket.





my friend making a pass testing out his gopro...

1994t/a

Factory f-body radiator and fans.Also used ebay one wire alternator

streetknight2

iTrader: (10)

I can't use the f body accessories on the LQ4 can I? Thought I read some bolt holes were missing compared to the aluminum blocks.

Prorac1

iTrader: (4)

IIRC, you have to drill a hole and tap it on the driver side front of the block for the alternator bracket. It has been done. Eric L

xpndbl3

iTrader: (23)

just drill/tap a hole with the metric tap and it's all good, did it in about 30 minutes taking my time to drill straight into the block and level

Gray86hatch

iTrader: (83)

LSmonster

iTrader: (2)

Old set-up before I went turbo

Spoolin_Notch

iTrader: (8)

^ What Distributor set up is that? One of the best looking lsx foxbody engines bays I've seen!

LSmonster

iTrader: (2)

Thanks! It's a Jesel Belt drive distributor that is driven with a pulley and belt off the upper cam pulley... Which is a Jesel belt drive cam setup.

DMMizell

iTrader: (1)

the lil' ole 346