Stock lq6 carb dyno
#22
Maybe the sdpc truck cam???
http://sdparts.com/details/scoggin-d...er/cc54-st1-11
I put it in my 5.3, motor only ran on the stand though. Idles good, not sure on power gains. I used the blue springs from lingenfelter
http://www.lingenfelter.com/mm5/merc...gory_Code=C159
70 bucks for the set
http://sdparts.com/details/scoggin-d...er/cc54-st1-11
I put it in my 5.3, motor only ran on the stand though. Idles good, not sure on power gains. I used the blue springs from lingenfelter
http://www.lingenfelter.com/mm5/merc...gory_Code=C159
70 bucks for the set
#23
I think I might go with the hot cam. I think it would make more power then the zo6 cam. The. Down the road I will put in a 2200 to 2400 converter. Now I just have to find a used hot cam lol. Let me know if anyone has one thanks
#28
TECH Enthusiast
iTrader: (6)
Join Date: Aug 2008
Location: DAVIDSON NC
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
i picked up 2 tenths and 2 or 4mph(cant remember)going from a stock truck cam to a 02 zo6 cam in the 1/8...went from shifting at 6000 to 6500...this was a bone stock 03 lq4 with a dual plane performer intake also.
#40
On The Tree
iTrader: (1)
Maybe the sdpc truck cam???
http://sdparts.com/details/scoggin-d...er/cc54-st1-11
I put it in my 5.3, motor only ran on the stand though. Idles good, not sure on power gains. I used the blue springs from lingenfelter
http://www.lingenfelter.com/mm5/merc...gory_Code=C159
70 bucks for the set
http://sdparts.com/details/scoggin-d...er/cc54-st1-11
I put it in my 5.3, motor only ran on the stand though. Idles good, not sure on power gains. I used the blue springs from lingenfelter
http://www.lingenfelter.com/mm5/merc...gory_Code=C159
70 bucks for the set