Aje
Thread Starter
Staging Lane
Joined: Jul 2013
Posts: 92
Likes: 1
From: tx
Yep done it quite a few times even with the stock K member. I found 1 3/4" BBK 351W fox headers. Cut the flanges off flush. Rounded the square port. Used a trans tailshaft with the right size small bolt and welded a large 1/2" socket on the other end to put a breaker bar on and rounded them. Its a lot easier to take them to a muffler shop and have them swelled back to round if your bucks up or know someone.
Put them on the car and make sure they clear the transmission shift linkage before tacking them.
Unless you get a great deal on the swap headers, I would just get the dynatechs. Keep a eye on the classifieds here, they pop up for sale all the time.
Put them on the car and make sure they clear the transmission shift linkage before tacking them.
Unless you get a great deal on the swap headers, I would just get the dynatechs. Keep a eye on the classifieds here, they pop up for sale all the time.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
