1979rs/z28

iTrader: (21)

I bled my clutch!
I love my speedbleeder

NightWindDriftr

iTrader: (4)

Laying down some clearcoat in a bottle to the touch-up paint I applied yesterday. Getting ready to wetsand and take the Porter Cable to it.

jimmyN

Installed my license plate.

mateols1ss

iTrader: (1)

Finally got my tags

blackz28x07

Went to get my converter in and found out my trans is most likely toast

CHRRRIS

Do you think that just because the fluid is black? That's what a shop told me so they just changed the fluid and nothing else and it seems to be fine. No slipping before or after the fluid change though, so I don't know why the fluid was so bad in the first place. Probably just hasn't been replaced in a while.

JHayesLS1

Painted the SS grille on the hood scoop black instead of the other owners silver, buffed the headlights and Saturday I'm getting tint done on the entire car.

blackz28x07

Yea, I'm not a trans expert, buy I know the basics. But it shifts fine right now, so hopefully it'll be ok.

kool_chic2

iTrader: (1)

fixed the A/C

CHRRRIS

Changed the oil and cut/connected the two wires going to the low oil level sensor, as mine has been broken for a while but isn't coming out any time soon because I don't want to remove the headers! Anyways it appears to have worked, no more low oil light!

riceburnerZ28

iTrader: (20)

I replaced my outer tie rods and struts.

jsteele90

iTrader: (13)

changed fuel filter, cleaned tb, regapped plugs, topped off fluids

01stngkiller

changed oil (gonna try pennzoil), new mirror bezel, shift ****, skip shift eliminator, new belt tensioner, cleaned engine bay, restored headlights (kinda) and a 5:00 am bath this morning before work. been a good weekend

13lu91rS

iTrader: (1)

replaced a master, stripped the bleeder on the slave, found out my clutch is toast and my trans is leaking behind the slave.

CHRRRIS

De-badged, removed side molding, and installed new nose emblem.

RedRocketZ28

iTrader: (19)

Dropped transmission and took out clutch, with the help of some buddies. In the next couple of weeks will be rebuilding the trans and installing a new clutch and slave before it goes back together.

IDriveChevy

iTrader: (5)

Painted more of my engine bay, eagerly awaiting it to come back from the machine shop

Chadlee2KZ

iTrader: (9)

I did the wire! mod in the engine bay. Cleaned up the pass side real good

BigJeff_SS

I installed the UMI adjustable PH and rear LCA. Not to mention fixing the previous owners lack of wrenching ability.

mightyquickz28

iTrader: (8)

Finished re-installing the TH350 after thouroghly hosing the 6 speed install. Driving her tomorrow!