that_ef

iTrader: (5)

Ended up taking the cat's off to check the internals of them since i was getting an o2 sensor and a cat code. took off the passenger side first since it was a b2p2 o2 throwing the code... come to find out the cat was hollowed out by the previous owner... curious why i wasnt getting the same code for the other side i ended up pulled that cat off also just to find out it wasn't hollowed out. I ended up hollowing that one out also to match the other side and will have it like this until my headers, x-pipe and slp shotgun bullets get ordered

JDEP162

yesterday was track day, test and tune. drove her an hour there. ran 2 passes, both spraying 150 shot. pulled a 12.3 and drover all the way home, no leaks, ses lights, knocks, noises or overheats. purred like a cat even after being beaten like a dog.

totalchaos

iTrader: (5)

washed it. painted my valve covers and coils. found out my 10 bolt is making a clunking sound going it gear , priced out a fab9 rear from Midwest. got new poly motor motors earlier this week. looking at buying a dh spoiler and cme valance from 6le.

Empatho

iTrader: (16)

Did the fuel pump access panel mod and replaced the fuel pump. Since I had the rear interior all out to do the fuel pump access panel I ordered 64 square ft of second skin damplifier and 9 square feet of luxury liner pro. I have been wanting to put some sound deadening in the car to reduce road and exhaust noise. The true duals helped a lot with the drone, but I still want the car more silent.

Majestic9C1

iTrader: (19)

did the rear hatch latch mod.... no more hitting the button 5 times to get it to pop up all the way

that_ef

iTrader: (5)

did the Whistler mod to the headlights. Guess i didnt get a good enough seal because now there is condensation on both lenses. Oh well, ill try to get a better seal tomorrow.

JDEP162

too bad didnt seal, looks sharp. maybe a little cl3ear silicone around the seal areas

that_ef

iTrader: (5)

That's what I was thinking, just running a bead on the outside and see what happens.

Majestic9C1

iTrader: (19)

Put an Impala shift boot on that I got from the local junkyard... should have came that way from the factory

totalchaos

iTrader: (5)

Removed my a/c system and did the TCS relocate .

Empatho

iTrader: (16)

After a lot of hours and sore fingers, I can finally say that I'm done installing second skin damplifier from the rear seats all the way to the hatch. The rear of the car doesn't sound like its gonna fall apart when I hit a bump anymore and I don't hear the fuel pump anymore. Road noise and exhaust noise is down a little bit but I still need to add some to the doors.

Harris1

iTrader: (4)

I finally got my 4 link installed, and washed it!

camaroboy408

iTrader: (6)

I drove mine and priced a oil pressure sending unit

JDEP162

the doors done will give u a nice difference in road noise, and music volume inside, i coated outer skin as much as cud reach, and covered the inner well, noticable difference for sure. also the areas around the back seats where the spearkers are behind the sail panel benefits huge from it

Empatho

iTrader: (16)

I'm probably going to do the doors next week, I can't wait to hear the difference. I bought 2 cans of 3m rubberized undercoating to cover the front and rear fender wells and also the bottom of the trunk to reduce a little bit more road noise. Got a phone app to record the sound decibel before and after sound deadening, still waiting to do the front doors and the undercoating to get the after sound decibel. Pretty sure the app is not precise but it was free

JDEP162

good idea, i shud have did a total before and after of mine and my suv, wud be a cool comparison

LPE 403

iTrader: (6)

......should be ready for the Nat's in a couple weeks.

totalchaos

iTrader: (5)

ordered a ls2 bare block from gm.

JDEP162

that sounds promising be sure to update

Majestic9C1

iTrader: (19)

installed a Chevy Cobalt bowtie on my SLP grille (was embossed with SS) and since its not an SS I had to cover it up..