Chevrolet Camaro 1967-2002 The forum for diehard Camaro fans

Drl/turn signal issue

Thread Tools
 
Search this Thread
 
Old 02-19-2017 | 07:24 PM
  #1  
SSJ Kirby's Avatar
Thread Starter
Teching In
 
Joined: Feb 2017
Posts: 2
Likes: 0
Default Drl/turn signal issue

I've noticed that the drl/turn signal light isn't working on the passenger side. The 194 bulb not the 3157. The bulb itself looks fine and i put it on the other side and it does work. Not sure if a wiring issue or bad socket
Old 02-19-2017 | 10:25 PM
  #2  
peterpar's Avatar
Launching!
 
Joined: Nov 2015
Posts: 200
Likes: 10
Default

What's the condition of the socket? Does it look like it's been hot? I would then check for power at the socket first.
Attached Files
File Type: pdf
2002 DRL Lights.pdf (83.9 KB, 92 views)
Old 02-20-2017 | 12:03 AM
  #3  
King Nothing's Avatar
TECH Veteran
iTrader: (9)
 
Joined: Oct 2005
Posts: 4,766
Likes: 23
From: Central Valley
Default

Check if the socket has corrosion in it, if so you need to replace the socket itself. Easy enough job but they aren't cheap, I know because I had to replace 3 out of the 4 light sockets in my front end. Also, before you connect the wires, test them in the new socket. My passenger side has a ground issue in the harness, so I ran a new ground wire to the frame until I'm ready to pull the front harness out and check the wires individually.



Quick Reply: Drl/turn signal issue



All times are GMT -5. The time now is 04:17 PM.