88 iroc z
#1
TECH Apprentice
Thread Starter
88 iroc z
jus got the car the end of july . needs lots of work . im going the 5.3 btr stage 2 turbo cam .7875 turbo th400 trans .
mines the grey one .
mines the grey one .
The following users liked this post:
Bigbirdtrucker (12-22-2019)
#4
TECH Apprentice
Thread Starter
i went over today an we jacked the rear up . the brakes are rusted to the rotors . been a few years setting
#5
TECH Apprentice
Thread Starter
it has the 350 tpi . 700r4 tranny an a 10 bolt disk brakes limited slip with 2.77 ratio from factory. ive got the rpo codes .
Last edited by freeky; 08-17-2018 at 03:16 AM.
#6
TECH Addict
iTrader: (1)
I'm not as familiar w/ the 3rd-gens, going mainly from memory after years of wanting to buy one and watching what options were offered as years wore on. But I didn't think you could get a 5-speed in a 3rd gen 'vert. One of the reasons I was so happy when the 4th gen 'verts came out in '94 w/ a M6 optional. My recollection is that the 5.7L was not optional w/ a MT or in the 'verts, and the M5 was not available in the 'verts. Please, enlighten me.
#7
TECH Apprentice
Thread Starter
Trending Topics
#9
TECH Apprentice
Thread Starter
im picking up fourth gen camaro brake calibers an rotors an what ever else i need to upgrade the brakes to 4th gen . were headed to richmond for nascar race . so where stopping off in colonal beach va to get the brakes. hopefully ill pick up a 5.3 next month . cant wait to get started on this engine
#10
TECH Apprentice
Thread Starter
hoping to get to work on it sum this weekend
#11
TECH Apprentice
Thread Starter
ive changed my plan to a 6.0 .
first part bought
first part bought
#12
TECH Apprentice
Thread Starter
im still debating on what transmission . its got a 700r4 from the factory i could rebuild . i havent heard much about these behind a 6.0 with turbo . im leaning toward a 4l80 instead of a th400 for overdrive . any ideas ?
#14
TECH Apprentice
Thread Starter
#16
TECH Apprentice
Thread Starter
thanks 80/ta/lt1 . i guess ill be looking for a 4l80 .
#17
TECH Apprentice
Thread Starter
https://www.jegs.com/i/Aeromotive/027/11569/10002/-1 will this work for 600 whp ? whats its hp limit ?
The following users liked this post:
Geardo (12-23-2019)
#20
TECH Apprentice
Thread Starter
Great help for people shopping fuel pumps. https://www.realstreetperformance.co...t-performance/
lines work or should i use -10 lines ?
Last edited by freeky; 02-18-2019 at 02:07 PM.