Third gen thread!
#143
Previous owner of my car just hooked me up with this video of it. Enjoy
http://picapic.net/media/Z9Q474
Only the first part has my Z28 in it. The rest is some Viper/350Z stuff.
http://picapic.net/media/Z9Q474
Only the first part has my Z28 in it. The rest is some Viper/350Z stuff.
#149
Teching In
iTrader: (1)
Join Date: Jul 2004
Location: Amarillo, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
here's my 91z, its going through and LS1 and 4l60 conversion now. Pics of the conversion on Pg 8 http://www.cardomain.com/ride/758603/1
#154
is that the final resting place on your som ls1 conversion? what mounts are you using? i ask because the motor looks very far forward, something i almost did had i not really looked into the mounts.
#156
http://memimage.cardomain.net/member...3_143_full.jpg
this picture concerns me but you don't have the wiper motor in to properly guage distance. reguardless you shouldn't see the bellhousing or trans at all and you can see right down behind your motor. while this isn't that important it will affect how tight your clearance is for your radiator and fan assembly as well as it will change the length needed for your driveshaft.
however both shots that bother me are more of an above angle then normal so as i said it's hard to tell without the other accessories in. just something to note before you finish and find out something is wrong. i'm sure you will test fit all of those pieces before actually finishing the trans install anyhow.
beyond that it looks great.
this picture concerns me but you don't have the wiper motor in to properly guage distance. reguardless you shouldn't see the bellhousing or trans at all and you can see right down behind your motor. while this isn't that important it will affect how tight your clearance is for your radiator and fan assembly as well as it will change the length needed for your driveshaft.
however both shots that bother me are more of an above angle then normal so as i said it's hard to tell without the other accessories in. just something to note before you finish and find out something is wrong. i'm sure you will test fit all of those pieces before actually finishing the trans install anyhow.
beyond that it looks great.
#157
Originally Posted by 1hot91
here is my contribution.. sporting an ls6 nowdays.
http://gmhightechperformance.com/features/0504htp_z28/
little updated with the new 19's, pictures of the new drivetrain and interior to follow. not much left to do to a car that isn't on this one.
http://www.cardomain.com/ride/124316/14
http://gmhightechperformance.com/features/0504htp_z28/
little updated with the new 19's, pictures of the new drivetrain and interior to follow. not much left to do to a car that isn't on this one.
http://www.cardomain.com/ride/124316/14
Here is the first car I ever rode in.
#160
On The Tree
Join Date: Jul 2005
Location: San Leandro(basically Oakland), CA
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 92CamaroReallySlow
Here are some of my car. Good, but not perfect .