How to fit a TALL person in a Z28??
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: Centreville, VA
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My buddy of mine is really interested in getting a Z28 and would definately get one now. However he has a bit of a problem, being that he is 6'6" tall and has long legs. He can't quite fit in the car, even with the seat all the way back and the steering wheel tilt all the way up. Does anybody know of any way to get around this? I was thinking that the chair could be moved back about 1-2 inches and bolted down into the frame further back. Does anybody know if this can be done and if it's realistic? If anybody can think of anything else let me know! I sure appreciate it! Thanks!!
#2
TECH Enthusiast
iTrader: (6)
Join Date: May 2004
Location: Elgin
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i do not know what to tell ya,
but there are 2 guys on a local board,
they are both 6'5 or so and both weigh 275 easy.
these guys should be football players,
one has an lt-1 t/a and the other an lt-1 z28
but there are 2 guys on a local board,
they are both 6'5 or so and both weigh 275 easy.
these guys should be football players,
one has an lt-1 t/a and the other an lt-1 z28
#4
On The Tree
iTrader: (18)
Join Date: Jun 2006
Location: Smyrna De.
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have the same problem. I'm 6'6" and weigh about 240 lbs. I cut 4 peices of half inch steel approx. 4" long 2" wide clamped then together, and drilled each end. Painted each peice, bolted one end to the existing seat bolts the bolted the seat to the other end. It sits the seat up a little higher but beats having my knees jamed up around the steering wheel. I've thought about using a friends welder to make a peice to sit the seat a little lower but haven't had the time. I'll take a few pics if you want.
#5
TECH Apprentice
iTrader: (6)
Join Date: Sep 2006
Location: UCLA
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well, I'm 6'4" and 140 lbs and I fit in just fine with the seat about 3/4 of the way back.
It gets kinda annoying when someone parks really close to your driver's side and you have to shift your whole body around while holding the door to get out.
It gets kinda annoying when someone parks really close to your driver's side and you have to shift your whole body around while holding the door to get out.
Trending Topics
#10
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
What year is his car? I know several people over 6'5" who can easily fit into an LT1 Z28. I am 6'3", and I have no problem fitting. I don't even have to put the seat all the way back. That is something I have never heard of.
#11
TECH Veteran
iTrader: (10)
Join Date: May 2006
Location: Bay Area, CA (Pittsburg)
Posts: 4,240
Likes: 0
Received 2 Likes
on
2 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I dont see how a 6'6 person could fit in a camaro comfortable. Im 6'3 and have the seat all the way back to be comfortable. I have very long legs and i feel if i get any taller it might be uncomfortable. I think i read something on the forum somewhere about people moving the seat brackets back.
#13
12 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Im 6"3" and i move the seat about 3/4s back, i guess u could always move the brackets! Look at it this way, thier is way more room in the drivers seat of an f-body than in the driver's seat of a rustang! Drove a friends 04 Cobra, Awesome power, hated the seat and shifting!!
#16
12 Second Club
iTrader: (49)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by BayAreaSS
I dont see how a 6'6 person could fit in a camaro comfortable. Im 6'3 and have the seat all the way back to be comfortable. I have very long legs and i feel if i get any taller it might be uncomfortable. I think i read something on the forum somewhere about people moving the seat brackets back.
#17
Devil Dog, OohRah!
iTrader: (1)
Join Date: Mar 2006
Location: Des Moines, Iowa
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Da Swami
Well, I'm 6'4" and 140 lbs
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Oh, and I fit just fine in the Z28.
#20
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Da Swami
Well, I'm 6'4" and 140 lbs and I fit in just fine with the seat about 3/4 of the way back.
It gets kinda annoying when someone parks really close to your driver's side and you have to shift your whole body around while holding the door to get out.
It gets kinda annoying when someone parks really close to your driver's side and you have to shift your whole body around while holding the door to get out.
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)