240z l76/4l80e
Trending Topics
#8
Launching!
Thread Starter
Join Date: Jan 2008
Location: Allen,TX.
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Just a small shot of juice (150) until I stroke it next year! Would love to do a budget turbo but it will take me a yr or two to save the cash to do it.
Thanks,
Mike
Thanks,
Mike
#9
Launching!
Thread Starter
Join Date: Jan 2008
Location: Allen,TX.
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
I did the DOD delete, added a EPS cam 230/241 Duration, .600/.607 lift on a 113 lobe sp. hand ported the exhaust side of the L92 heads, 1 3/4" long tube headers.
Had a friends shop go thru the 4L80E and add a Transgo HD@ shift kit, bought a Edge 9.5" 3600 stall converter, switched all accessories over to GTO/LS1 stuff, the Corvette accessories would not fit!
Had a friends shop go thru the 4L80E and add a Transgo HD@ shift kit, bought a Edge 9.5" 3600 stall converter, switched all accessories over to GTO/LS1 stuff, the Corvette accessories would not fit!
#12
Launching!
Thread Starter
Join Date: Jan 2008
Location: Allen,TX.
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Well the transmission will not shift, only goes into park, reveres, nuetral, and low. Maybe a tcm problem or wiring issue, dirty socket, not sure. Goeff at EPS did the tune for both. Was concerned as the ecm is for an 07 and the tcm an 08, hopefully that isn't the problem.
#15
Launching!
Thread Starter
Join Date: Jan 2008
Location: Allen,TX.
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Well the L76 was fun but like everything the time had come for a change so we installed a LSX 436 in the Z mated to a 4L80E, just getting her tuned on the dyno.
#17
Headers with 4L80e?
I know this is an older post but I am doing an LQ4 with 4L80e and looking at Long tube headers. I may try c10 swap headers if they are even close to fitting.. What did you use for headers? I hope mine turns out half as good as yours. It's really nice.