southerntidefan

I'm getting to the fuel side of my swap and I have 3 fuel lines coming out of the engine what is what? I've read about return lines but only one. I have 3 lines that run to intake from rear of jeep. This is a 5.3 supposed to be from 04 suburban but wiring harness has blue and red connectors and get.

Atomic

iTrader: (37)

One is probably the evap line from the gas tank to the intake.

southerntidefan

Sorry something cut me off. im sure I'll have more questions as I go, thanks for the help. FYI one line is 3/8 has filter on it, two are 5/16

southerntidefan

Oh OK. Makes sense. Should I tee it in with return line? Or do away with it?

southerntidefan

Roll Tide by the way

i r teh noobz

iTrader: (4)

EVAP can be removed if you don't have to pass emissions testing. If you keep it, it does not connect to the other lines in any way. It vents the fuel tank vapors to the intake manifold.

southerntidefan

Cool thanks. I guess next question is which one is evap? The 5/16 line coming out of top of intake or the other?

ls1nova71

iTrader: (4)

The one coming out of the top of the intake that's hooked up to the purge solenoid is the one to remove. The return line will be hooked to the fuel rail under the feed line.

southerntidefan

Thanks. Very helpful very quick