LQ4 Oxygen Sensor Question
05-02-2008, 11:50 PM
#2
The LQ4`s have 4 o2`s like all of the other LS series engines. 2 before the cats and 2 after, the 2 after may have already been removed if the harness is from a vehicle that was already modded, but there should still be 2 left on the harness.
05-02-2008, 11:52 PM
#3
Teching In
Thread Starter
Join Date: Apr 2008
Location: Chandler, AZ
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Do you know if the post cat o2 sensor wires are bundled with the transmission wires?
05-03-2008, 12:50 AM
#5
Teching In
Thread Starter
Join Date: Apr 2008
Location: Chandler, AZ
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Ahhh i found my passenger side o2 wire, it was tucked up onto the manifold, it looked like it was connected to something. There is about 4-5 other connectors on the harness that i need to figure out.
05-03-2008, 07:00 PM
#7
Teching In
Thread Starter
Join Date: Apr 2008
Location: Chandler, AZ
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
It looks like B is brown and black, C is darker green and black, E is lighter green and black.
I also found a connector down by the A/C compressor that i have no idea about (ties into the same bundle as the A/C clutch connector). The wires are a light blue and a light green.
Trending Topics
05-04-2008, 10:39 AM
#8
C is the A/C low pressure switch
The connector down by the A/C compressor is the A/C high pressure switch
E should be the low coolant level sensor
B I`m still not sure on, the only thing I can remember that uses a brown and black wired 2 wire plug is the oli level sensor, but I don`t think that will stretch down to the pan.
What year wiring harness is that?
The connector down by the A/C compressor is the A/C high pressure switch
E should be the low coolant level sensor
B I`m still not sure on, the only thing I can remember that uses a brown and black wired 2 wire plug is the oli level sensor, but I don`t think that will stretch down to the pan.
What year wiring harness is that?
05-04-2008, 10:59 AM
#9
Teching In
Thread Starter
Join Date: Apr 2008
Location: Chandler, AZ
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
C is the A/C low pressure switch
The connector down by the A/C compressor is the A/C high pressure switch
E should be the low coolant level sensor
B I`m still not sure on, the only thing I can remember that uses a brown and black wired 2 wire plug is the oli level sensor, but I don`t think that will stretch down to the pan.
What year wiring harness is that?
The connector down by the A/C compressor is the A/C high pressure switch
E should be the low coolant level sensor
B I`m still not sure on, the only thing I can remember that uses a brown and black wired 2 wire plug is the oli level sensor, but I don`t think that will stretch down to the pan.
What year wiring harness is that?
its a 2001 harness.
