mustang suspension question
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i have a 4cyl mustang to do my swap
the rear end in it is a 7.5 so am looking at a sn95 ( 94-98) rear w/ disc brakes
whats the different between the 87-93 8.8 rear and 94-98 rear cobra or gt besides the drum brakes ????? i could do a disc brake swap on the 87-93 8.8??
and if i do this swap do i have to use the sn95 or fox body rear upper & lower control arms and shock ?????
will the aje ls1 k-member fit on the 4cyl ???
i also have the chance to get the sn95 front spindle and cailper, rotors. does it matter if it a gt or cobra. do i need to use the shock & lower control arm from the sn95 on the mustang and does the lower control arm fit in to the aje k member
the rear end in it is a 7.5 so am looking at a sn95 ( 94-98) rear w/ disc brakes
whats the different between the 87-93 8.8 rear and 94-98 rear cobra or gt besides the drum brakes ????? i could do a disc brake swap on the 87-93 8.8??
and if i do this swap do i have to use the sn95 or fox body rear upper & lower control arms and shock ?????
will the aje ls1 k-member fit on the 4cyl ???
i also have the chance to get the sn95 front spindle and cailper, rotors. does it matter if it a gt or cobra. do i need to use the shock & lower control arm from the sn95 on the mustang and does the lower control arm fit in to the aje k member
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I believe the sn-95 rear end is 3/4 " wider than the fox body rear end. I am planning on doing this exact same thing so be sure to list your swap and your discoveries. Mustang forums might have more info on this stuff.
Last edited by forgotten; 11-17-2008 at 06:47 PM.
#3
On The Tree
iTrader: (20)
Join Date: Mar 2005
Location: Denton, NC
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The sn95 rear is wider. I think there is a swap kit out there to use the sn95 disc brakes on the 87-93 rear. The upper and lower control arms are the same.
Yes, the AJE LS1 k member will fit the 4 cyl. car. The frame mounting positions are the same on 4,6, & 8 cyl. Mustangs.
Check out www.Corral.net for the disc brake swap.
I have a friend that done the exact disc brake swap. I'll email him and find out what he had to use. Hope this helps.
Yes, the AJE LS1 k member will fit the 4 cyl. car. The frame mounting positions are the same on 4,6, & 8 cyl. Mustangs.
Check out www.Corral.net for the disc brake swap.
I have a friend that done the exact disc brake swap. I'll email him and find out what he had to use. Hope this helps.
#5
Registered User
Join Date: Sep 2008
Location: ashland kentucky
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
you should be able to use the same shocks and uppers and lowers and if your putting an sn95 rear in it you'll have 5 lug on the back and 4 lug on the front. if you do that you can use gt 5 lug spindles and gt brakes and lincoln mark 8 rotors and youll have 5 lug all around
#6
On The Tree
iTrader: (20)
Join Date: Mar 2005
Location: Denton, NC
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
All the uppers and lowers are the same and have the same mounting locations. The shocks also have the same mounting positions. Length of the shocks i'm not sure about. They should be the same though.
Trending Topics
#8
Staging Lane
iTrader: (3)
Join Date: Feb 2003
Location: WACO
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The sn95 rear is wider. I think there is a swap kit out there to use the sn95 disc brakes on the 87-93 rear. The upper and lower control arms are the same.
Yes, the AJE LS1 k member will fit the 4 cyl. car. The frame mounting positions are the same on 4,6, & 8 cyl. Mustangs.
Check out www.Corral.net for the disc brake swap.
I have a friend that done the exact disc brake swap. I'll email him and find out what he had to use. Hope this helps.
Yes, the AJE LS1 k member will fit the 4 cyl. car. The frame mounting positions are the same on 4,6, & 8 cyl. Mustangs.
Check out www.Corral.net for the disc brake swap.
I have a friend that done the exact disc brake swap. I'll email him and find out what he had to use. Hope this helps.
North Race Cars makes a custom mounting bracker to use the SN-95 Disk brakes on the Stock Fow Length axles.
These are for Cobra brakes
http://www.latemodelrestoration.com/...0%201&comp=LRS
These are for GT Brakes
http://www.latemodelrestoration.com/...0%201&comp=LRS
#9
Staging Lane
iTrader: (6)
Join Date: May 2007
Location: hayward, Ca
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
North Race Cars makes a custom mounting bracker to use the SN-95 Disk brakes on the Stock Fow Length axles.
These are for Cobra brakes
http://www.latemodelrestoration.com/...0%201&comp=LRS
These are for GT Brakes
http://www.latemodelrestoration.com/...0%201&comp=LRS
These are for Cobra brakes
http://www.latemodelrestoration.com/...0%201&comp=LRS
These are for GT Brakes
http://www.latemodelrestoration.com/...0%201&comp=LRS
#10
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LES SS your car looks fu*cking sweet with the 10.5 wheels out like that. fits with the fender real nice
what size tires are you running on the front and back? 4cyl springs all the way around???
if you launch the car to hard will it hit the fenders in the rear ??????
what size tires are you running on the front and back? 4cyl springs all the way around???
if you launch the car to hard will it hit the fenders in the rear ??????
#13
On The Tree
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
you have to change the master cylinder to a 93 cobra for the discs.. and add a proportioning valve.. usually a good spot is the PS firewall. or thats one of the easier routes to go..
dont think of using the PS rangers axles theyre weak as sh*t. GT brakes would be much easier to fit a 15" skinny drag style wheel up front.. just buy some decent axles.
if your gonna do a drag setup id recommend using c-clip eliminators
dont think of using the PS rangers axles theyre weak as sh*t. GT brakes would be much easier to fit a 15" skinny drag style wheel up front.. just buy some decent axles.
if your gonna do a drag setup id recommend using c-clip eliminators
#15
On The Tree
iTrader: (20)
Join Date: Mar 2005
Location: Denton, NC
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Like I say, check out www.Corral.net. Or try an ebay search. Either should bring up some parts for ya. Good luck on ur swap. Keep us posted.
#17
On The Tree
iTrader: (20)
Join Date: Mar 2005
Location: Denton, NC
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes, it's an adjustable valve that adjust the pressure between the front and rear brakes. Too much pressure to the back brakes causes the back brakes to lock up sooner than the fronts. Hope this helps.
#18
Staging Lane
iTrader: (3)
Join Date: Feb 2003
Location: WACO
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
28 spline is factory
http://www.latemodelrestoration.com/...0%201&comp=LRS
Or you can upgrade to 31 apline
http://www.latemodelrestoration.com/...0%201&comp=LRS
You will have to run a master cylinder designed for disk brake applications
1993 Cobra is the easiest but you can modify others to work as well, as far as proportioning valves go..most people I have seen mount a small willwood adjustable valve on the rear line that runs across the top of the firewall. They just replace the connector with the valve.
#19
Staging Lane
iTrader: (6)
Join Date: May 2007
Location: hayward, Ca
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
on the rear i used my stock 4cyl control arms for now, they bolt right up. in the front im using 87-93 aje tubular control arms. but you can use 4cyl ones if you want. its just harder to get the camber settings in spec with 87-93 control arms over the sn95
#20
Staging Lane
iTrader: (6)
Join Date: May 2007
Location: hayward, Ca
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
you have to change the master cylinder to a 93 cobra for the discs.. and add a proportioning valve.. usually a good spot is the PS firewall. or thats one of the easier routes to go..
dont think of using the PS rangers axles theyre weak as sh*t. GT brakes would be much easier to fit a 15" skinny drag style wheel up front.. just buy some decent axles.
if your gonna do a drag setup id recommend using c-clip eliminators
dont think of using the PS rangers axles theyre weak as sh*t. GT brakes would be much easier to fit a 15" skinny drag style wheel up front.. just buy some decent axles.
if your gonna do a drag setup id recommend using c-clip eliminators