I didn't even notice it. I used the same inline on my stand-alone pump and my 70's fuel system also 
is there room? 
Mini fuel system is done! (pics)
Thread Starter
TECH Enthusiast
iTrader: (1)
Joined: Oct 2002
Posts: 694
Likes: 0
From: Hawthorn Woods, IL
Mini fuel system is done! (pics) Went with the return on top of the tank, no tube inside the tank since I didn't want it to vibrate and crack off later. There is a baffle inside the tank that will keep the return and the sump separate.
Thread Starter
TECH Enthusiast
iTrader: (1)
Joined: Oct 2002
Posts: 694
Likes: 0
From: Hawthorn Woods, IL
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
that looks great.
i would be a little worried about pluging up that black thing. we didn't run a pre filter on our fairmont project and ran a very small fuel filter after the pump. we pluged up the pump with junk more than once and were always cleaning that small post filter. i dont know where the junk came from but it got in there somehow. from now on we are running a large prefilter.
i would be a little worried about pluging up that black thing. we didn't run a pre filter on our fairmont project and ran a very small fuel filter after the pump. we pluged up the pump with junk more than once and were always cleaning that small post filter. i dont know where the junk came from but it got in there somehow. from now on we are running a large prefilter.
that looks great.
i would be a little worried about pluging up that black thing. we didn't run a pre filter on our fairmont project and ran a very small fuel filter after the pump. we pluged up the pump with junk more than once and were always cleaning that small post filter. i dont know where the junk came from but it got in there somehow. from now on we are running a large prefilter.
i would be a little worried about pluging up that black thing. we didn't run a pre filter on our fairmont project and ran a very small fuel filter after the pump. we pluged up the pump with junk more than once and were always cleaning that small post filter. i dont know where the junk came from but it got in there somehow. from now on we are running a large prefilter.
The before pump filter is just to screen out the big pieces to protect the pump.
I have alway read that you don't want too fine of a filter before the pump. Just something to keep the big pieces from damaging the pump. That looks like a Mallory unit with the screen inside. Should be really easy to clean out.
It is the after pump filter that protects the injectors/carb. The after pump filter can afford a bigger pressure drop than before pump filter.
