1978 Malibu LQ9/LS6 --TCI 4l60E Swap(updated 2-5-2010)
#81
On The Tree
iTrader: (4)
Join Date: Sep 2007
Location: Jersey Shore, NJ
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It had plans to be there, just as a project. Well since the rain ruined our plans now.
Hopefully we get the floorpans installed before the Nov Rental, then i can get the exhaust installed 3" all the way back, seats will then get mounted and then maybe have the cage in it by then.
Funds have ran out a bit, so its digging to try and get alittle bit done at a time.
Ralph
BoostedLQ9SS
Hopefully we get the floorpans installed before the Nov Rental, then i can get the exhaust installed 3" all the way back, seats will then get mounted and then maybe have the cage in it by then.
Funds have ran out a bit, so its digging to try and get alittle bit done at a time.
Ralph
BoostedLQ9SS
![Thumb](https://ls1tech.com/forums/images/smilies2/thumb.gif)
#82
On The Tree
Thread Starter
iTrader: (11)
Join Date: Nov 2008
Location: Ocean County, NJ
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
New Video!
http://www.youtube.com/watch?v=lCmH9zHne4w
Getting Closer!
Parts to finish
1. Electric Fans
2. New Floor pans
3. anti-roll bar
4. mount console
5. 6 pt chrome moly cage
6. 5 point harnesses
7. E.T. Streets
Ralph
VETTEDNABU
http://www.youtube.com/watch?v=lCmH9zHne4w
Getting Closer!
Parts to finish
1. Electric Fans
2. New Floor pans
3. anti-roll bar
4. mount console
5. 6 pt chrome moly cage
6. 5 point harnesses
7. E.T. Streets
Ralph
VETTEDNABU
#84
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm waiting on the full 3 '' exhaust vid !!! sounds great open though, what mufflers do you plan on using ? I just looked at your list of stuff to finish.... um.. i didnt see exhaust ???
#85
On The Tree
Thread Starter
iTrader: (11)
Join Date: Nov 2008
Location: Ocean County, NJ
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yea that is needed too.
May use Torque Tech system with Borla, Magnaflow, or Dynomax.
3" fron to back or we may use their Tailpipes and just make our own front kit.
Not sure yet.
Gotta get the floors done first and then exhaust.
Ralph
VETTEDNABU
May use Torque Tech system with Borla, Magnaflow, or Dynomax.
3" fron to back or we may use their Tailpipes and just make our own front kit.
Not sure yet.
Gotta get the floors done first and then exhaust.
Ralph
VETTEDNABU
#87
On The Tree
Thread Starter
iTrader: (11)
Join Date: Nov 2008
Location: Ocean County, NJ
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
New Exhaust installed 3" DynoMax Ultra Flo Welded Mufflers, Hedman 3" X-Pipe, Custom bent Exhaust from Local Meineke Muffler in Brick, NJ
http://www.youtube.com/watch?v=Q851F8GVe78
Ralph
http://www.youtube.com/watch?v=Q851F8GVe78
Ralph
#90
Launching!
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Very nice build..
I see that you used bottle jacks to raise the car up at the rockers to paint the chasis..
Did you also replace the chasis\body bushings?
If so..Did you have any problems or advise after tackling this? I should replace mine as well since its a 23+ year old car..But reluctant to do so in the garage..
Any advise based on your experience would be appreciated..![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
Thanks,
Matt
I see that you used bottle jacks to raise the car up at the rockers to paint the chasis..
Did you also replace the chasis\body bushings?
If so..Did you have any problems or advise after tackling this? I should replace mine as well since its a 23+ year old car..But reluctant to do so in the garage..
Any advise based on your experience would be appreciated..
![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
Thanks,
Matt
#92
On The Tree
Thread Starter
iTrader: (11)
Join Date: Nov 2008
Location: Ocean County, NJ
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Very nice build..
I see that you used bottle jacks to raise the car up at the rockers to paint the chasis..
Did you also replace the chasis\body bushings?
If so..Did you have any problems or advise after tackling this? I should replace mine as well since its a 23+ year old car..But reluctant to do so in the garage..
Any advise based on your experience would be appreciated..![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
Thanks,
Matt
I see that you used bottle jacks to raise the car up at the rockers to paint the chasis..
Did you also replace the chasis\body bushings?
If so..Did you have any problems or advise after tackling this? I should replace mine as well since its a 23+ year old car..But reluctant to do so in the garage..
Any advise based on your experience would be appreciated..
![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
Thanks,
Matt
Once the car goes to the fab shop for the new floor plans, 6pt cage, and he will fix up the mounts .
Ralph
#94
TECH Enthusiast
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Very nice build..
I see that you used bottle jacks to raise the car up at the rockers to paint the chasis..
Did you also replace the chasis\body bushings?
If so..Did you have any problems or advise after tackling this? I should replace mine as well since its a 23+ year old car..But reluctant to do so in the garage..
Any advise based on your experience would be appreciated..![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
Thanks,
Matt
I see that you used bottle jacks to raise the car up at the rockers to paint the chasis..
Did you also replace the chasis\body bushings?
If so..Did you have any problems or advise after tackling this? I should replace mine as well since its a 23+ year old car..But reluctant to do so in the garage..
Any advise based on your experience would be appreciated..
![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
Thanks,
Matt
I did mine in the driveway with a floorjack and some wood 4x4's. My car is a clean southern car though no rust. FWIW
#97
On The Tree
Thread Starter
iTrader: (11)
Join Date: Nov 2008
Location: Ocean County, NJ
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well We Got insurance on the car today. Thursday it will get QQ Plates.
We installed new polished alum B&M Trans Pan that doesn't leak like the TCI pan did.
We installed Spohn 1 5/16 Front Sway Bar -- What a diffrence in the feel of the front of the car.
Car will get alignment, scaled, pinion angle set, adjust suspension all on Thursday --- so we can take it out for a drive on Saturday or Sunday.
Ralph
We installed new polished alum B&M Trans Pan that doesn't leak like the TCI pan did.
We installed Spohn 1 5/16 Front Sway Bar -- What a diffrence in the feel of the front of the car.
Car will get alignment, scaled, pinion angle set, adjust suspension all on Thursday --- so we can take it out for a drive on Saturday or Sunday.
Ralph