heads up to the carb guys. intakes for $95
#48
#52
TECH Fanatic
iTrader: (37)
Joined: May 2008
Posts: 1,034
Likes: 0
From: ocala,fl--- forest-ocklawaha
here's the pic of there intake installed.. nice!!!! scrow to the bottom
https://ls1tech.com/forums/conversio...le-pics-4.html
yes a blow thru setup.. mpt-70
https://ls1tech.com/forums/conversio...le-pics-4.html
yes a blow thru setup.. mpt-70
#57
If anyone bought one of these and decided not to use it I'd be willing to purchase it from you for the $95 +shipping price.
Thanks,
Darren
darrenstancil@yahoo.com
Thanks,
Darren
darrenstancil@yahoo.com
#60
TECH Senior Member
iTrader: (10)
Joined: May 2005
Posts: 5,353
Likes: 2
From: Bossier city,LA barksdale AFB
i bought one of the ones drilled for inj. if i ever switch over-came with bolts and instructions (has gasket #s)
my Edelbrock uses the mega dollar GM o ring gaskets (i tried the orange ones that were 1/2 the costs, but "melt" and dont hold up-the Edelbrock has cracked a couple times around the o rings, i had to weld it up
i ordered a couple of the $95 ones, the GM intake is a little lower and uses the i piece gasket, so i might switch over to the GM intake
for those that need a gasket, they list FelPro #1312-2 as a .045 thick,
FelPro #1312-3 as a .060 thick, and SCE gasket #211134 as .060 thick
my Edelbrock uses the mega dollar GM o ring gaskets (i tried the orange ones that were 1/2 the costs, but "melt" and dont hold up-the Edelbrock has cracked a couple times around the o rings, i had to weld it up
i ordered a couple of the $95 ones, the GM intake is a little lower and uses the i piece gasket, so i might switch over to the GM intake
for those that need a gasket, they list FelPro #1312-2 as a .045 thick,
FelPro #1312-3 as a .060 thick, and SCE gasket #211134 as .060 thick
I know these pics are not them same brand but you get the idea
EFI
Carb