LS6 Porsche 964 build
#22
Teching In
iTrader: (2)
Join Date: May 2009
Location: Hatfield, AR
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
>Do you have any shots of the radiator setup? I was
>actually thinking of this exact swap earlier today and was
>wondering if there was a good way to mount the radiator
>in the front instead of horizontal in the tail.
Mine is a 85 Carrera, but the radiator setup is very similar.
Pics at http://hatfield.homelinux.com/porsche_v8.html
Regards,
Ken
>actually thinking of this exact swap earlier today and was
>wondering if there was a good way to mount the radiator
>in the front instead of horizontal in the tail.
Mine is a 85 Carrera, but the radiator setup is very similar.
Pics at http://hatfield.homelinux.com/porsche_v8.html
Regards,
Ken
#23
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
>Do you have any shots of the radiator setup? I was
>actually thinking of this exact swap earlier today and was
>wondering if there was a good way to mount the radiator
>in the front instead of horizontal in the tail.
Mine is a 85 Carrera, but the radiator setup is very similar.
Pics at http://hatfield.homelinux.com/porsche_v8.html
Regards,
Ken
>actually thinking of this exact swap earlier today and was
>wondering if there was a good way to mount the radiator
>in the front instead of horizontal in the tail.
Mine is a 85 Carrera, but the radiator setup is very similar.
Pics at http://hatfield.homelinux.com/porsche_v8.html
Regards,
Ken
Beautiful car Ken. What do you have done to your motor? Are you running the 915 trans? Where did you run your water lines to the front?
BTW, I would never mount the rad in the rear. Looks bad (fans are visible from the outside of the car and the wing is not a factory design). Adds weight in the absolutely worst place to add weight.
Cheers, Russ
#24
Teching In
iTrader: (2)
Join Date: May 2009
Location: Hatfield, AR
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Russ,
Thank you.
More details in this thread:
https://ls1tech.com/forums/conversio...che-911-a.html
Regards,
Ken
Thank you.
More details in this thread:
https://ls1tech.com/forums/conversio...che-911-a.html
Regards,
Ken