New Retro LSX conversion company Installs Kits Heades LHX oil pans and anythings LS
#61
FormerVendor
Thread Starter
iTrader: (9)
Join Date: Mar 2009
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
I will have 1 7/8 stainless header options for the 3rd gen and I will have the older trans tested against the LS headers as well. These stainless headers will also be well under the cost of any other header on the market. Also these headers will use the traditional collector that is welded on and not just bolted to the header.
I have an old 3rd gen movie car that’s getting a monster engine so I will definitely need at least a 1 7/8 for my build so I know there is a demand for larger headers especially with the GEN IV engines.
I have an old 3rd gen movie car that’s getting a monster engine so I will definitely need at least a 1 7/8 for my build so I know there is a demand for larger headers especially with the GEN IV engines.
#64
Looking for 1 7/8 primaries and 3.0" collector headers for below C2s.
66 vert with LS7 & 6l80E
64 Coupe with LS3 480HP and 4L65
Last edited by poorhousenext; 12-25-2009 at 12:37 PM.
#73
FormerVendor
Thread Starter
iTrader: (9)
Join Date: Mar 2009
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
We will have the Monte headers as one of the first sets of headers after this batch
The first headers are
63-81 Corvette
PS those are gorgeous Corvettes, we have a 66 black convertible that we are building and I have always been a big fan of the 63-67 body style.
73-87 GM truck
70-81 Camaro
1967-69 F-body
These have been prototyped and will be off for production very soon.
Prices will be under $600 for the stainless. Exact cost will be up once I have them ready to ship.
What motor are you looking for on the WS6?
I just pulled in a wreaked 00 WS6? Or I can set you up with just a long block.
The third Gen will be after this first batch of cars but I have the mock up cars at the shop and just need to take care of a few customer installs, and get the first set of kits and headers into production
The first headers are
63-81 Corvette
PS those are gorgeous Corvettes, we have a 66 black convertible that we are building and I have always been a big fan of the 63-67 body style.
73-87 GM truck
70-81 Camaro
1967-69 F-body
These have been prototyped and will be off for production very soon.
Prices will be under $600 for the stainless. Exact cost will be up once I have them ready to ship.
What motor are you looking for on the WS6?
I just pulled in a wreaked 00 WS6? Or I can set you up with just a long block.
The third Gen will be after this first batch of cars but I have the mock up cars at the shop and just need to take care of a few customer installs, and get the first set of kits and headers into production
#75
wanna use my 1965 impala ss to develop a header motor mount package? i'll bring it down and you make me a deal on parts! will your chevy truck kit allow the use of the sm465 trans? in it's stock location? wht would i need a diferent crossmember if thats left alone? or should i just call, Thanks for your time,nate
#77
FormerVendor
Thread Starter
iTrader: (9)
Join Date: Mar 2009
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
headers will be 1 3/4 and 1 7/8 with 3in ball collectors.
The vettes I have in 2in.
Any luck on finding a new Monte yet? The one you had took such a nasty hit right after you got it running? That’s just painful after all that work!
Nate give me a call on my cell so we can talk about the 65 do you want a full install or just mock up?
678 873 0847
The truck kit uses the OEM crossmember and I build adapter brackets to attach it to the advanced adapter brackets. I also have a OEM TH-350 NP203 going in the mock up truck for a customer and ill dig up a 4 speed and see what I can come up with.
I still need a AC/PS/PB Nova for mock up or a first gen
I have two mustangs next door to the shop and after I get the current batch of kits from prototyping into production ill go after a couple ford including the fox body as well.
The vettes I have in 2in.
Any luck on finding a new Monte yet? The one you had took such a nasty hit right after you got it running? That’s just painful after all that work!
Nate give me a call on my cell so we can talk about the 65 do you want a full install or just mock up?
678 873 0847
The truck kit uses the OEM crossmember and I build adapter brackets to attach it to the advanced adapter brackets. I also have a OEM TH-350 NP203 going in the mock up truck for a customer and ill dig up a 4 speed and see what I can come up with.
I still need a AC/PS/PB Nova for mock up or a first gen
I have two mustangs next door to the shop and after I get the current batch of kits from prototyping into production ill go after a couple ford including the fox body as well.
#78
On The Tree
iTrader: (3)
Join Date: Aug 2009
Location: Tennessee
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
headers will be 1 3/4 and 1 7/8 with 3in ball collectors.
The vettes I have in 2in.
Any luck on finding a new Monte yet? The one you had took such a nasty hit right after you got it running? That’s just painful after all that work!
Nate give me a call on my cell so we can talk about the 65 do you want a full install or just mock up?
678 873 0847
The truck kit uses the OEM crossmember and I build adapter brackets to attach it to the advanced adapter brackets. I also have a OEM TH-350 NP203 going in the mock up truck for a customer and ill dig up a 4 speed and see what I can come up with.
I still need a AC/PS/PB Nova for mock up or a first gen
I have two mustangs next door to the shop and after I get the current batch of kits from prototyping into production ill go after a couple ford including the fox body as well.
The vettes I have in 2in.
Any luck on finding a new Monte yet? The one you had took such a nasty hit right after you got it running? That’s just painful after all that work!
Nate give me a call on my cell so we can talk about the 65 do you want a full install or just mock up?
678 873 0847
The truck kit uses the OEM crossmember and I build adapter brackets to attach it to the advanced adapter brackets. I also have a OEM TH-350 NP203 going in the mock up truck for a customer and ill dig up a 4 speed and see what I can come up with.
I still need a AC/PS/PB Nova for mock up or a first gen
I have two mustangs next door to the shop and after I get the current batch of kits from prototyping into production ill go after a couple ford including the fox body as well.
#79
TECH Senior Member
iTrader: (12)
Got my LHX oil pan today.. looks very will made, good casting and machine work. I will be checking it out more soon.
Anyone have a Truck Windage try for sale..?.. I will also have my F-Body oil pan setup for sale soon.
Sure wish I could get my Nova over to you guys to use as the mock up car.. That way I could give my input also and get it the way I want LOL...
Anyone have a Truck Windage try for sale..?.. I will also have my F-Body oil pan setup for sale soon.
Sure wish I could get my Nova over to you guys to use as the mock up car.. That way I could give my input also and get it the way I want LOL...