Skyline R33 getting LS1 / t56
#22
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
How much did you estimate it would cost to finish?
I would be willing to front the conversion costs if its not too much, so that teh project can get completed, then we can arrange a sale of the completed car or something??
I would be willing to front the conversion costs if its not too much, so that teh project can get completed, then we can arrange a sale of the completed car or something??
#27
Launching!
iTrader: (5)
Join Date: Jun 2009
Location: Upstate, SC
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Can you send me more detailed pictures on the inside and outside of the car please, so I can show my brother (business partner) them. sabastian458@yahoo.com
#33
11 Second Club
iTrader: (12)
Join Date: Oct 2005
Location: Springhill, FL
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yea but its basically the only way to legally register a skyline in the US. they arent legal here. The hoops you have to jump through and money you have to spend to get a complete car legally titled in the U.S. unbelievable.
If this car already had a legal title I would have bought it in a heartbeat. Good luck with the sale
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#34
Launching!
Thread Starter
iTrader: (4)
Join Date: Jun 2004
Location: College Station, TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Howdy,
The buyer that was lined up backed out (flaked out, lied, however it went). But i decided to keep it.
This weekend i'm cutting up the subframe, making motor mounts, and watching football
The buyer that was lined up backed out (flaked out, lied, however it went). But i decided to keep it.
This weekend i'm cutting up the subframe, making motor mounts, and watching football
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
#35
Launching!
Thread Starter
iTrader: (4)
Join Date: Jun 2004
Location: College Station, TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ok, update time.
Motor is in, mounts are made, etc. Fitting took some time but it came out nicely. Right now i plan on keeping A/C, etc.
![](http://www.z28evans.com/album/albums/uploads/sky/normal_enginefinal.jpg)
GTO oil pan with a few mods, this is a junk pan i used for test fitting. Similiar to a 240sx pan mod, but with a little more clearance.
![](http://www.z28evans.com/album/albums/uploads/sky/normal_oilpantemp2.jpg)
Shifter position came out great, no need to off-set the shifter, etc.
![](http://www.z28evans.com/album/albums/uploads/sky/normal_shifterfinal.jpg)
The sticking point was the RHD steering getting in the way of the starter. A mini-starter in conjunction with moving the rack about 1/2 in to the right leaves clearance. I was originally going the have the motor down and back a little more, but i needed to move the motor up to help clear the steering. Good thing there is room in the engine bay.
cut steering rack mount welds -
![](http://www.z28evans.com/album/albums/uploads/sky/normal_steering1.jpg)
Moved the mounting pad a little. After welding and paint it will look stock.
![](http://www.z28evans.com/album/albums/uploads/sky/normal_steering.jpg)
Steering rotated to the closest fit position, there is more room than it appears in the photos -
![](http://www.z28evans.com/album/albums/uploads/sky/normal_steering2.jpg)
![](http://www.z28evans.com/album/albums/uploads/sky/normal_steering3.jpg)
link to more photos - new photos on page 8 - 10
Evans Family Photo Album - Sky
Next up is turbo research, single or twins, etc. Need to order some so i can make the pipeing , etc.
James
Motor is in, mounts are made, etc. Fitting took some time but it came out nicely. Right now i plan on keeping A/C, etc.
![](http://www.z28evans.com/album/albums/uploads/sky/normal_enginefinal.jpg)
GTO oil pan with a few mods, this is a junk pan i used for test fitting. Similiar to a 240sx pan mod, but with a little more clearance.
![](http://www.z28evans.com/album/albums/uploads/sky/normal_oilpantemp2.jpg)
Shifter position came out great, no need to off-set the shifter, etc.
![](http://www.z28evans.com/album/albums/uploads/sky/normal_shifterfinal.jpg)
The sticking point was the RHD steering getting in the way of the starter. A mini-starter in conjunction with moving the rack about 1/2 in to the right leaves clearance. I was originally going the have the motor down and back a little more, but i needed to move the motor up to help clear the steering. Good thing there is room in the engine bay.
cut steering rack mount welds -
![](http://www.z28evans.com/album/albums/uploads/sky/normal_steering1.jpg)
Moved the mounting pad a little. After welding and paint it will look stock.
![](http://www.z28evans.com/album/albums/uploads/sky/normal_steering.jpg)
Steering rotated to the closest fit position, there is more room than it appears in the photos -
![](http://www.z28evans.com/album/albums/uploads/sky/normal_steering2.jpg)
![](http://www.z28evans.com/album/albums/uploads/sky/normal_steering3.jpg)
link to more photos - new photos on page 8 - 10
Evans Family Photo Album - Sky
Next up is turbo research, single or twins, etc. Need to order some so i can make the pipeing , etc.
James
#36
On The Tree
Join Date: Nov 2009
Location: Canby, Oregon
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I think any project with the LS1 is awesome! Great choice i actually was thinking about how badass one of these r33's would be with an awesome engine! Post some vids at the end
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)