1963 Chevy Nova Tubbed BackHalfed And A Ls with a little boost!!
02-13-2010, 11:34 PM
#1
Staging Lane
Thread Starter
iTrader: (7)
Join Date: Jul 2008
Location: WYOMING
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
1963 Chevy Nova Tubbed BackHalfed And A Ls with a little boost!! Heres a few pics of the 63 Nova Finishing up the hot parts and turbo headers. I will try to keep it updated Parts are showing up everyday and Im ready to get this thing done Shes been sitting to long!!
Heres a breakdown of the car..
Comp eng. Backhalf 4 link & coilovers
Mark willims 9" 18.5" Slicks on draglites
Stock 6.0 Custom motor mounts
l76 Intake 90mm edelbrock T body
Ported l99 heads tsp pushrods xtream springs
Nastys fuel rails BG king sumo pump acelronics sticks and versafueler
Devils own progresive meth injection
W/A Intercooler
BW S488mm Turbo From Forced inductions
Presicion Wastegate
Turbo Headers built from speedways ls build your own header kit
Car Still needs (All of this will be done real soon ASAP)
Wiring (About half done)
Brakes (I have stainless line and fittings Next weekends project!!
Oil drain and supply for the turbo (waiting on parts)
Finish downpipe 5 to 4 dumps behind the rear tire!(waiting on parts)
Finish up the custom alternator setup(I will post pics works great alternator sits down by the balancer)
Hope you guys Like what i have done!!!
More pics and progress soon to come!!!
Heres a breakdown of the car..
Comp eng. Backhalf 4 link & coilovers
Mark willims 9" 18.5" Slicks on draglites
Stock 6.0 Custom motor mounts
l76 Intake 90mm edelbrock T body
Ported l99 heads tsp pushrods xtream springs
Nastys fuel rails BG king sumo pump acelronics sticks and versafueler
Devils own progresive meth injection
W/A Intercooler
BW S488mm Turbo From Forced inductions
Presicion Wastegate
Turbo Headers built from speedways ls build your own header kit
Car Still needs (All of this will be done real soon ASAP)
Wiring (About half done)
Brakes (I have stainless line and fittings Next weekends project!!
Oil drain and supply for the turbo (waiting on parts)
Finish downpipe 5 to 4 dumps behind the rear tire!(waiting on parts)
Finish up the custom alternator setup(I will post pics works great alternator sits down by the balancer)
Hope you guys Like what i have done!!!
More pics and progress soon to come!!!
Last edited by Liftedsilvy; 02-28-2010 at 11:24 PM.
02-14-2010, 11:40 AM
#2
looks great im in the process of a ls swap and restoration of a 62 sedan i need a digital camera so i can post pics. that cars gonna be wicked. what rear suspension you using?
02-14-2010, 05:11 PM
#4
Staging Lane
Thread Starter
iTrader: (7)
Join Date: Jul 2008
Location: WYOMING
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Right on guys...Ya time for some pics!! Hopefully today ill get some more stuff done figure out the radiator brackets...I moved it over as fas as i could get it towadrs the drivers side to make room for this freaking back breaking heavy *** BW turbo...It will be Worth it!!!
Last edited by Liftedsilvy; 02-15-2010 at 12:08 AM.
Trending Topics
02-28-2010, 11:11 PM
#8
Staging Lane
Thread Starter
iTrader: (7)
Join Date: Jul 2008
Location: WYOMING
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Hers a few more pics of the progress the versa fueler is wired along with the two step and relocating the coil packs...Tons more to do still everyday its getting a little further
Hope You Enjoy!!
Hope You Enjoy!!
