'87 c10 with 5.3/4l60e
#1
'87 c10 with 5.3/4l60e
this thread is to jomomma & ls1nova71. wake up. you both have c10's that r not in use. please, i repeat , please turn them in and take up knitting LOL. ls1nova71 stop playing with the popsicles. lol. the conversion is complete. here are some pics. ls1tech fam thanks for all the advice and pics. you all were an inspiring and informative.
#6
'87 c10 with 5.3/4l60e
today i test drove my truck for the first time, with open exhaust. it seems like it had more power than my 383 stroker. yes i said it. the 323 (lm7) felt like it has more power than my 383. unbelievable. its a drive by wire unit. i barely touch the throttle and it felt like it wanted to break the tires loose.wow unbelievable.
#7
congrats
Trending Topics
#8
12 Second Club
iTrader: (39)
Join Date: Jun 2006
Location: surry, va
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
congrats man! i was up and running, but the 5.3 had some issues. it seems i put in all new parts exept the bearings and it cost me. so, now i have an ls1 w/ a g5x3 cam at the engine builders place getting finished.
#11
87 c10 with 5.3/4l60e
thanks for all the compliments. to answer yelo71454 & buick455 i used jba shorty headers and the kwik performance truck ac mount kit. the headers resemble the stock truck headers but flow much better. i chose the jba's to avoid notching the frame. everyone i spoke to with the c10 lsx swap had to notch the frame no matter what heads we used. i used the kwik performance kit because the fabbed tune port set up looked ugly. i also would've had to buy the ugly stuff to fab. on that note spend the money once. i know, i know, i shouldve waited til i found a good used l92 engine n tranny. ill post a video of shorty running later once im certain most bugs r worked out. keep on wrenching ls1tech fam.
#12
update
hello ls1tech fam. what r you all doing for tuning of pcm's. vendors reflash pcm's for base tunes to get the lsx swap running, where do you go from there? as i drive the converted vehicle i noticed black smoke from the exhaust with black soot landing on the pavement, as i press the throttle. as i drive the vehicle, it hesitates and the excelleration is not crisp like the wife's 'burban. help me out. thanks in advance.
#13
On The Tree
Join Date: Feb 2009
Location: san antonio tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
dec010974 did you hook up the obdII plug... if you did, run a scan it might be a 02 sensor.. good luck..
by the way.. I broke down for the first time and after going away as far as 90 miles from the house I broke down when I was going for a ride and I stop 2 blocks away from my house at my friends house and my starter went out oh well
also I 2nd you on the power ... I broke tires loose when going about 40mph already good ls pooowwwwaaaaa
by the way.. I broke down for the first time and after going away as far as 90 miles from the house I broke down when I was going for a ride and I stop 2 blocks away from my house at my friends house and my starter went out oh well
also I 2nd you on the power ... I broke tires loose when going about 40mph already good ls pooowwwwaaaaa
#14
On The Tree
Join Date: Feb 2009
Location: san antonio tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
#15
TECH Addict
iTrader: (2)
Last time I was going to make a trip to the JYD, it rained... then turned to snow and back to freezing rain. WTF?!
Now if you southern cats would deliver some of your warmer weather to us...
BTW, nice truck. Glad it's finally running, now go lay some rubber to celebrate!
Last edited by gofastwclass; 02-28-2010 at 09:51 AM.
#16
pcm tuning
hello to all. r there any options to tuning or programming the pcm. the vendor disable the VATS and flashed the pcm to run in lsx swap form. while driving the vehicle i noticed black soot when i press the throttle. when driving the acceleration is not crisp.help me out ls1tech.
#17
On The Tree
Join Date: Feb 2009
Location: san antonio tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
hello to all. r there any options to tuning or programming the pcm. the vendor disable the VATS and flashed the pcm to run in lsx swap form. while driving the vehicle i noticed black soot when i press the throttle. when driving the acceleration is not crisp.help me out ls1tech.
gofastwclass,,,, you are not going to like what I am about to say but,,,, I was about to go do what you said "laid some rubber and celebrate" and when I was on the freeway I noticed a hesitation and smell burnt trans. fluid.. so I pull over and yeapp... smell burnt so I trying to take off again to get off the freeway and 1, 2 gear good,, but then it just slips from 2 to 3rd for a loooong time and well long story short tranny is out..... I am gonna see if the guy where I bought it comes thru with the warranty
#18
damn damn damn
sorry to hear that. i guess we r both side lined. right now im not liking the way shordee drives. one guy i spoke(tuner) to this weekend told he likes the FAST stand alone system. yes i know, $2500. i think im gonna try to find someone locally to dyno/tune shordee for real world conditions. the stand alone system wont see my $2500, just yet. i forgot to tell that tuner this was a budget build.
#20
On The Tree
Join Date: Feb 2009
Location: san antonio tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
sorry to hear that. i guess we r both side lined. right now im not liking the way shordee drives. one guy i spoke(tuner) to this weekend told he likes the FAST stand alone system. yes i know, $2500. i think im gonna try to find someone locally to dyno/tune shordee for real world conditions. the stand alone system wont see my $2500, just yet. i forgot to tell that tuner this was a budget build.