LsX Mustang Guys with DYNATECH headers come in here!
08-03-2010, 08:51 PM
#103
I installed them on mine in about 5 min.
Post of pic of your motor mounts.
Pass goes in from the top and driver from the bottom with the shaft out just slides right up in. pull it up and bolt it on.
Mine were the easiest set I have had on my car. 4-5 different sets
Tim
Post of pic of your motor mounts.
Pass goes in from the top and driver from the bottom with the shaft out just slides right up in. pull it up and bolt it on.
Mine were the easiest set I have had on my car. 4-5 different sets
Tim
08-03-2010, 09:02 PM
#104
Launching!
iTrader: (11)
Join Date: Sep 2007
Location: Hillsdale, Michigan
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
I agree with Tim
When we first put mine n his car last fall they were in and out in about 10 minutes. That is when he noticed te drivers side was close to the steering shaft
When we first put mine n his car last fall they were in and out in about 10 minutes. That is when he noticed te drivers side was close to the steering shaft
so i could miss the trans mount.
08-04-2010, 08:58 AM
#106
Staging Lane
Join Date: Jul 2004
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
11-03-2010, 05:30 PM
#108
I hope everyone has the new style dynatech headers or got them changed out! I purchased my dynatech headers from an individual who decided not to proceed with his build, so I bought his headers from him (they were still new!!) well I just got my car assembled and the steering shaft is hitting the header which was the WHOLE problem before!!!! Well now they won't replace my driver side header because I don't have an invoice or dealer I bought them from.....it's my opinion that if you produce a product that has a defect then you would replace it no matter who had it...the problem still remains that I have a product that is useless to me! My only options are to buy another set of headers (I DO NOT think so!!!) or purchase a $200 steering shaft.....ALL because they produced a below standard product!!! Thanks DYNATECH!!!!
11-03-2010, 05:35 PM
#109
Launching!
iTrader: (2)
Join Date: Jan 2010
Location: Demotte , IN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
I hope everyone has the new style dynatech headers or got them changed out! I purchased my dynatech headers from an individual who decided not to proceed with his build, so I bought his headers from him (they were still new!!) well I just got my car assembled and the steering shaft is hitting the header which was the WHOLE problem before!!!! Well now they won't replace my driver side header because I don't have an invoice or dealer I bought them from.....it's my opinion that if you produce a product that has a defect then you would replace it no matter who had it...the problem still remains that I have a product that is useless to me! My only options are to buy another set of headers (I DO NOT think so!!!) or purchase a $200 steering shaft.....ALL because they produced a below standard product!!! Thanks DYNATECH!!!!
Ehh you sound like a tool anyways. I never gave them a invoice number. said hey I bought em thru jegs ,and it doesn't fit. He charged me 250 to ship it right away . I got it , sent otherone back in same box with call tag , and got money right away. SUper fast ,and great to work with.
11-03-2010, 05:37 PM
#110
Well if a girl is a tool, then whatever you say! My point was I'm upset because I have something I can't use...and I paid for them! If they helped me like they did you I'm sure I'd feel just like you! Thanks for your input!
11-04-2010, 10:08 AM
#114
Any of you can call me any name you choose. I'm partly venting and also letting anyone out there know you might as well buy your headers new from dynatech because otherwise you will NOT receive ANY help, I can buy one header for $379 or buy a $200 steering shaft..That's the help I got..sorry I'm just so disgusted right now with the response given about their product... With that being said does anyone have any suggestions on fixing the problem other than the flaming river steering shaft?
11-04-2010, 10:39 AM
#116
Talk with Greg. I know him personally and have been to their facility.
I also met with the guy that designed the header and they were told back when they started this the fox and Sn-95 steering shaft was in the same location. They never checked them on a fox car.
I would suggest not calling them anymore untill greg is back. You may burn a bridge.
Tim
I also met with the guy that designed the header and they were told back when they started this the fox and Sn-95 steering shaft was in the same location. They never checked them on a fox car.
I would suggest not calling them anymore untill greg is back. You may burn a bridge.
Tim
11-04-2010, 11:07 AM
#117
Thanks so much for your response! I'll just wait and not call anymore until then. I feel like they might be acting this way towards me because I'm a girl...who knows! Anyways thanks again!
11-04-2010, 05:01 PM
#118
i was in the EXACT same position. i bought them from some one he never used them, I tried to install them scratched them up pretty good trying to install them. i talked to someone at dynatech told him i tried to put them on he said he didn't care. he sent me a prepaid tag, packaged them up, and sent them out. got a brand new set with bolts and gaskets never had to put 1 cent out.
