When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dynatech installed on the engine out of the car pics?
I read through this thread and didn't see what I was looking for, so I'll ask- does anyone have any pics of the Dynatech passenger side on the engine with the engine out of the car? I am swapping a 5.3 truck motor into a 1998 Durango and have run into a passenger frame rail issue with every header I have tried (2006+ Trailblazer, Schoenfeld 1302LS1, 68-72 A-body). I have a choke point that is about 3.25" wide where it has to pass thru, so doubled tubes won't work. I'm using a 1&3/4 longtube from a 2006+ Trailblazer on the driver side and it has lots of room, so I'd like an equivalent size here. The Dynatech passenger side (pic attached) basically has the tubes in line which is what I need, but at $600 I can't afford to be wrong on these. I really only need the passenger side, so I may check with them to buy just one if I can see how it aligns on the block with the engine out of the car.