Ls1 dodge ram!!!
#241
I rebuilt it with motive 3.90 gearset, and a stock posi unit. The axles are stock 31 splines. The stock 9.25 axle is big and heavy, very limited aftermarket support, but as long as the posi unit is fresh and pinion preload is PERFECT it can be strong... Oh also I used a Dana 60 yoke for the 1350 ubolt style to eliminate the strap style that like to throw u joints
#242
10 Second Club
iTrader: (11)
Hmm that's weird haha. Good thing you didn't bring the car!! Also here ya on the house buying. I close this week on my first house. Can't even afford 400 bucks for tires just to go play lol. But after a few months it will be all good and spending spree is back on. Good luck!!
#243
TECH Senior Member
iTrader: (27)
No, I'm from Jefferson City, so KC is about two and a half hours away. I wanted to go last year, but something came up, but this year, I'm already scheduled off work, so I'm for sure going.
#244
10 Second Club
iTrader: (11)
I got lucky when we bought our house because we were able to get the 100% financing due to being outside the city limits. I'm not sure they are doing those loans anymore though.
No, I'm from Jefferson City, so KC is about two and a half hours away. I wanted to go last year, but something came up, but this year, I'm already scheduled off work, so I'm for sure going.
No, I'm from Jefferson City, so KC is about two and a half hours away. I wanted to go last year, but something came up, but this year, I'm already scheduled off work, so I'm for sure going.
#251
dodge ram
Bringing up this old post again but I'm gonna be buying a 89 w150 from my gfs brother. I'm going to be doing an ls1 swap in it. I saw you did an oem camaro radiator and s10 mounts and a 98 corvette fuel setu. A 4l60e a np208. What years was everything from? And what else did you have to do?