New ECU Pins? (Adding Fan Control)
Thread Starter
On The Tree
Joined: Apr 2010
Posts: 174
Likes: 0
New ECU Pins? (Adding Fan Control) I have the proper crimper, but where can I find new ECU pins? I would like to add fan control to my harness, but don't want to splice wires if I can help it. A part number would be even better.
While Im asking, is it better to run the fans on their own with a sensor, or allow the ECU to control them??
While Im asking, is it better to run the fans on their own with a sensor, or allow the ECU to control them??
Thread Starter
On The Tree
Joined: Apr 2010
Posts: 174
Likes: 0
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
On The Tree
Joined: Apr 2010
Posts: 174
Likes: 0
I have no problems with splices. Im just picky about details, and when the Jeep is several miles from civilization, I don't want to worry about a bad splice. Normally I would use splices as needed, but Im tryin to avoid them if I can with this build.
right on man, anyways. i THOUGHT i ordered some pins from a <non sponsor> but they never showed up? not sure what happened. but i was able to pick up a basic GM terminal "kit" from my local parts store
On my wiring I took some of the unused wires/pins I had removed from the harness that weren't being used, such as EVAP stuff or A/C stuff, and added them at the proper pin locations for fan control. You will have to have the PCM programmed for fan control if it did not have it previously.
I have a bunch left over, and I have a habit of not throwing things away. Let me know what you need and I can most likely help.
I have a bunch left over, and I have a habit of not throwing things away. Let me know what you need and I can most likely help.
Thread Starter
On The Tree
Joined: Apr 2010
Posts: 174
Likes: 0
On my wiring I took some of the unused wires/pins I had removed from the harness that weren't being used, such as EVAP stuff or A/C stuff, and added them at the proper pin locations for fan control. You will have to have the PCM programmed for fan control if it did not have it previously.
I have a bunch left over, and I have a habit of not throwing things away. Let me know what you need and I can most likely help.
I have a bunch left over, and I have a habit of not throwing things away. Let me know what you need and I can most likely help.
