new mast motorsports oil pan ???
02-15-2011, 10:58 AM
#102
Teching In
Join Date: Feb 2011
Location: Central MN
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
02-15-2011, 11:35 AM
#103
I wanted to update everyone on the status of the oil pan.
We received the pans Friday and have been working diligently on prepping and assembling the pans. We look to ship half of the orders out tomorrow with the rest going out Wednesday. I’ve also attached a few pictures of a pan fitted on an engine!
Thank you again for your patience through this process!
We received the pans Friday and have been working diligently on prepping and assembling the pans. We look to ship half of the orders out tomorrow with the rest going out Wednesday. I’ve also attached a few pictures of a pan fitted on an engine!
Thank you again for your patience through this process!
02-17-2011, 05:55 PM
#110
Staging Lane
Join Date: Oct 2006
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Would you mind measuring the front of the pan? The drawing shows the thickness as 1.71 but that looks like its measured at the bump for the rod throws. What is the total thickness at the front of the pan including the rail?
02-17-2011, 07:06 PM
#112
Teching In
Join Date: Sep 2010
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Sure wil measure front when i get out of work in morning
Fyi for those tracking the packages, my tracking number or label was so faded that it was not scanned anywhere until i got it delivered
Fyi for those tracking the packages, my tracking number or label was so faded that it was not scanned anywhere until i got it delivered
02-18-2011, 04:54 AM
#113
Teching In
Join Date: Sep 2010
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
This is the best pic of the front without having an optical illusion of depth
The mast Measurements are right on
PF48 oil filter does not fit as i tried a 2010 camaro filter
Here i used mobil1 M1 107 for a 02 trans am
Here mobil 1 M1 206 for a 02 tahoe
The mast Measurements are right on
PF48 oil filter does not fit as i tried a 2010 camaro filter
Here i used mobil1 M1 107 for a 02 trans am
Here mobil 1 M1 206 for a 02 tahoe
02-18-2011, 07:28 AM
#114
Staging Lane
Join Date: Oct 2006
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
From the picture it looks like the gasket rail is about 3/8 thick is that right? So that would make the front of the pan roughly 1 3/8. This should be a preety big advantage. If I remember correctly my Autokraft pan was 1 3/4 in the front. Makes me wish I had measured how wide the rail area was in front. But just looking at the picture I don't think it was wide enough to have a tape laid across it without hanging off. Thanks for measuring
[/IMG] 
02-18-2011, 03:45 PM
#118
Teching In
Join Date: Feb 2011
Location: Central MN
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I'm guessing that straight AN fittings won't work,the hose ends will interfere with each other. A simple fix would be to use 45 deg or 90 deg fittings and rotate them slightly...
02-18-2011, 05:21 PM
#119
On The Tree
iTrader: (2)
Join Date: Mar 2005
Location: Detroit
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
I have an ARE dry sump (#1004) and it's the same mistake.
I'm in the process of making a special custom fitting to "stagger" the hoses on my ARE sump. I'll post it when I'm done.
02-18-2011, 05:50 PM
#120
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jul 2008
Location: wasilla, AK
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
now some one get one in a A body car so we can see the ground clearance and steering clearance! and mast sence you read this do you know when you might release a version with the trans bolts? and mounts for the oem debris shields? hell if you just made a plate to cover the open in the trans would be nice. thanks.
may have to order one up now.
may have to order one up now.