1969 GTO Judge Clone LQ4 turbo 4L60e
#102
What part number bulbs are these and what type of led? I'm looking to making the gauges in my Lemans easier to read until I swap over to all autometer gauges.
Car looks amazing, great swap
Car looks amazing, great swap
Last edited by '02TA; 01-26-2011 at 09:55 AM.
#106
ok so a couple days ago I took the Judge to get the exhaust done at a shop close to John's house... when i picked it up I noticed that the cut out was WAY too low. I asked him to fix it but he said he was too busy and I could bring it back this week.
Well I didn't want to take off work to do it and he doesn't work late. so Sam took it to OrangeChevyII (on DFWMustangs.com) today.. MAN.. I should have gone to him first! he cut off everything that the other guy put on because it just wasn't good enough. so here are a couple pics of the exhaust before and after
BEFORE
notice the cut out is pointed forward and to the side (scooping air into the exhaust)
AFTER
now here is what OrangeChevyII put together for me... I haven't seen it in person yet.. but I'm SUPER happy with what I see! thanks again man
and I hope your happy that you got to cut out those flowmaster copies haha
before the cut out and tail pipes where built
with the cut out
tailpipes
ignore the rust *** looking rear end
(on
Well I didn't want to take off work to do it and he doesn't work late. so Sam took it to OrangeChevyII (on DFWMustangs.com) today.. MAN.. I should have gone to him first! he cut off everything that the other guy put on because it just wasn't good enough. so here are a couple pics of the exhaust before and after
BEFORE
notice the cut out is pointed forward and to the side (scooping air into the exhaust)
AFTER
now here is what OrangeChevyII put together for me... I haven't seen it in person yet.. but I'm SUPER happy with what I see! thanks again man
and I hope your happy that you got to cut out those flowmaster copies haha
before the cut out and tail pipes where built
with the cut out
tailpipes
ignore the rust *** looking rear end
(on
#111
Boost is at 8 lbs right now I think ( only drove it while Sam tuned it and he's had the car the last couple days since) It's going to be dyno'd today if everything works out right
#112
Well when you think you have the money to afford it. Wait till you have another 5-6 grand because you'll need it
I thought I ha planne this out well enough to know what my budget needed to be but I've gone a little overboard haha.
But. When it's done it's going to be bad ***
I thought I ha planne this out well enough to know what my budget needed to be but I've gone a little overboard haha.
But. When it's done it's going to be bad ***
CONGRATS hope to see you at goodguys TMS this year.
#114
#116
#118
#120