Stans 1968 camaro LS swap and other upgrades!
#461
TECH Junkie
iTrader: (1)
Congrats, Stan!
Regarding your comment about the car 'pulling hard'...I've noticed that it comes on strong (mine, anyway) @ about 3200rpm. This is somewhat different than the old iron block, which began to pull strong @ 2200.
Because of this, I'm glad I went for the 3.70 rear.
What rear gear are you using?
Regarding your comment about the car 'pulling hard'...I've noticed that it comes on strong (mine, anyway) @ about 3200rpm. This is somewhat different than the old iron block, which began to pull strong @ 2200.
Because of this, I'm glad I went for the 3.70 rear.
What rear gear are you using?
#469
Well I been back to working on the car,putting a custom stereo in!my buddy jeremy did custom stereo for years and talked me in to one!here is the trunck so far,it will be covered with black vinyl!
#475
TECH Addict
iTrader: (3)
I like those kick panels! I wonder if those are the same as a 69? I would love to at least have some sound up front. I didnt want to add in the 4x10 in the center but also didnt want to cut up my doors. I didnt know they made such a panel. Thanks for the information and pics. Looks like my kick panels I just got done putting back in will be leaving in the near future.
Last edited by tsnow678; 09-11-2011 at 09:50 PM.
#478
here is a video of me driving the car,i was doing about 30 to 35 mph when i hammered on it.it chirped the tires pretty good when trans shifted!
http://youtu.be/iPz1ukHxtXw?hd=1
http://youtu.be/iPz1ukHxtXw?hd=1
#480
I have not put much miles on the car,I been mainly working on the stereo I'm also shopping superchargers prob get one over the winter and install it then!also have to get the Ls brake on to,manuals suck!lol