Steam port -AN adapters
01-21-2011, 10:42 AM
#41
On The Tree
iTrader: (2)
Join Date: Mar 2005
Location: Detroit
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
What is there to screw-up?
The existing hole is 1/4" which is perfect for tapping 1/16-27 npt. Just tap away. Then get a 1/16npt x -4AN adapter, some pipe sealer and you are set.
The existing hole is 1/4" which is perfect for tapping 1/16-27 npt. Just tap away. Then get a 1/16npt x -4AN adapter, some pipe sealer and you are set.
01-21-2011, 11:08 AM
#42
[QUOTE=tomz28;14375211] It appears you tapped the head or found an adequate fitting... ?
Great find. I could see putting the rest together based off of those.
Sorry. I had never heard of Kurt Urban before. QUOTE]
you need to do some more reading and getting around more
this is what i had to do.
https://ls1tech.com/forums/generatio...ines-pics.html
you need to do some more reading and getting around more
this is what i had to do.
https://ls1tech.com/forums/generatio...ines-pics.html
Wegner Automotive has them as well. $6.50 ea.
http://s41657.storefront-solutions.c...l.aspx?ID=3289
Andy1
http://s41657.storefront-solutions.c...l.aspx?ID=3289
Andy1
02-01-2012, 08:45 PM
#44
12 Second Club
iTrader: (11)
Join Date: Feb 2009
Location: Plainfield, IN
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
so just tap while on the car? just worried where those shavings go...even with grease...not sure how deep one would go on the hole? how far down before space or you see no more alum. to drill through ?
02-01-2012, 09:04 PM
#45
vents That is what I did on mine, works great, only cost is the AN adapters..
