What do 5G Camaro front end accessories line up with?
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: May 2006
Location: Metro Detroit
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
What do 5G Camaro front end accessories line up with?
Do they line up with corvette accessory drives?
The drivers side water inlet will really help my turbos downpipe fit alot better but I run corvette accessories
The drivers side water inlet will really help my turbos downpipe fit alot better but I run corvette accessories
#4
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: May 2006
Location: Metro Detroit
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Not a chance. The truck stuff sticks out about 3x as much as the corvette stuff. I run a 5.3 the whole reason I took off the truck stuff was because it stuck out so far. The 2010 camaros have a NEW waterpump that looks like corvette offset. Small pulley on it just like the LS3 vettes. The difference is that instead of the inlet on the passenger side, its on the drivers.
#5
TECH Addict
iTrader: (1)
First off, not all 5th gen Camaro accessories are the same. I have the 5th gen Camaro L99 accessories lining up with an '07 LY6 "truck" damper pulley, but the 5th gen LS3 accessories are shorter and will not line up (per frojoe's experience). More info in my build in the signature and frojoe's thread. The L99 comes in the automatic version (it has VVT & AFM/DOD). The LS3 comes in the manual version.
#7
So you want the Camaro water pump for the driver side inlet and thinner pulley? If thats the case then just buy the Camaro water pump and use spacers to line it up with the other accessories.
Trending Topics
#8
IIRC... the newer Corvettte LS3 WP has the drivers outlet and short like the typical camaro4 WP