Harness and PCM $ difference
Harness and PCM $ difference I'm looking at this harness on ebay for $500. It comes with a PCM and a base tune and sounds like a great deal. Especially after getting off the phone with a few companies like Speartech that make swap harnesses and getting prices upward of $1000 for the same package. My question is, what is the difference in these two setups? Is it the quality of materials used like wire, connectors and PCM manufacturer? I'm trying to avoid the, "I bought a cheap piece of **** and now I have to buy the expensive one I was looking at in the first place" scenario. Enlighten me. Thanks
Staging Lane
Joined: Jan 2011
Posts: 82
Likes: 0
One of the differences is the type of connectors they use like weatherpak. Some will replace a whole wire while others will use butt connectors. How the repackage the wires and what they connect such as relays for things like ignition or an OBDII connection. Somebody is going to say you get what you pay for but I've seen at least three companies making a really good product and not charging top dollar. The people that use them have no problems with them. Find out if anyone else here has used their product. Ebay feedback is based on what the user thinks when the product first arrived. I like to know how it works two years later. Post up the link and maybe someone will be familiar with it.
If its the PSI unit it will be fine according to the people who have given me feedback.
If its the PSI unit it will be fine according to the people who have given me feedback.
Last edited by ishmael; Feb 24, 2011 at 04:29 PM.
Who is the seller? I bought a harness/ pcm combo made for my setup for under $500 IIRC from chevythunder and I have nothing but good things to say about the product and service. The people who say 'you get what you pay for' often say that to justify spending more than they have to. Of course sometimes cheap **** is in fact just cheap **** but paying for a name is, well, paying for a name and in this game there are plenty of other things to spend money on.
Like ishmael said throw up a link and I'll bet someone here has at least heard of the seller.
Like ishmael said throw up a link and I'll bet someone here has at least heard of the seller.
Thanks for all the info. The guy is offering the harness, PCM, IAC, TPS, MAF, complete fuel system with Walbro inline 255lph, Wix Corvette filter/regulator all connections and braided line to plum a tank in the rear of a truck for an even grand. I talked to him today and he seems legit and knows what he's talking about anyway. Here's the link.
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_940wt_1167
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_940wt_1167
Open loop only WTF is the deal with that? If it's so great of a harness, why does he not include 8 simple wires and two O2 sensor connectors?
Jegs has Walbor for $99
Vette regulator is $40 from Rock Auto not $100
Does not even know how to spell tachometer "TACK"
$90 for a $20 trans connector from GM
No electric fan relays? Start adding up the things you need and a commercial harness is a better deal, IMO
Suggest you do some research before dropping down home hard earned cash
Jegs has Walbor for $99
Vette regulator is $40 from Rock Auto not $100
Does not even know how to spell tachometer "TACK"
$90 for a $20 trans connector from GM
No electric fan relays? Start adding up the things you need and a commercial harness is a better deal, IMO
Suggest you do some research before dropping down home hard earned cash
I can only speak for the harnesses we sell at PSI psiconversion.com. We have finally become a vendor on LS1tech. All of our harnesses are brand new, and use gm Delphi connectors and automotive grade wire and loom. The harness is very easy to install and we offer tech support. We also offer tuned refurbished pcms. Most harnesses ship within 5 days and are stocked. If I can answer any particular questions let me know.
Joe
Joe
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I can only speak for the harnesses we sell at PSI psiconversion.com. We have finally become a vendor on LS1tech. All of our harnesses are brand new, and use gm Delphi connectors and automotive grade wire and loom. The harness is very easy to install and we offer tech support. We also offer tuned refurbished pcms. Most harnesses ship within 5 days and are stocked. If I can answer any particular questions let me know.
Joe
Joe
Great price and quality harness. Jeff even made some small harness mods for me at no charge. wait was not bad, payed 1/17/11, received 2/10/11 as expected.
Open loop only WTF is the deal with that? If it's so great of a harness, why does he not include 8 simple wires and two O2 sensor connectors?
Jegs has Walbor for $99
Vette regulator is $40 from Rock Auto not $100
Does not even know how to spell tachometer "TACK"
$90 for a $20 trans connector from GM
No electric fan relays? Start adding up the things you need and a commercial harness is a better deal, IMO
Suggest you do some research before dropping down home hard earned cash
Jegs has Walbor for $99
Vette regulator is $40 from Rock Auto not $100
Does not even know how to spell tachometer "TACK"
$90 for a $20 trans connector from GM
No electric fan relays? Start adding up the things you need and a commercial harness is a better deal, IMO
Suggest you do some research before dropping down home hard earned cash
