1993 Mustang Notch LS1 Project
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I picked up a 93 Notchback mustang its a 4 banger so its going to get a complete over haul, the car is very clean no rust only a small damage to the driver side door and quarter panel. It should be a fun project hope to get a 10sec pass with it, it should be easy with this weight!
Pictures!
Driving her home
![](http://i934.photobucket.com/albums/ad184/Turbobuild/IMG_5538.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/IMG_5539.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/IMG_5543.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5545.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5547.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5549.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5550.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5551.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5553.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5554.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5555.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5556.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5557.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5558.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5559.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5560.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5562.jpg)
I was able to pick up some parts
Ls1 short block i was planning on taking it to a machine shop get it cleaned up and install new pistons,rings, and bearings.
I also got some fuel rail covers, Sub frame connectors
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5690.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5691.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5692.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5694.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5693.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5695.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5696.jpg)
I am picking up random parts as i shop around, this weekend i want to go to the junk yard and pick up a 8.8 rear end and i need to order a mini tub kit i want to fit some fat tire in the back
Pictures!
Driving her home
![](http://i934.photobucket.com/albums/ad184/Turbobuild/IMG_5538.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/IMG_5539.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/IMG_5543.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5545.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5547.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5549.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5550.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5551.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5553.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5554.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5555.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5556.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5557.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5558.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5559.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5560.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5562.jpg)
I was able to pick up some parts
Ls1 short block i was planning on taking it to a machine shop get it cleaned up and install new pistons,rings, and bearings.
I also got some fuel rail covers, Sub frame connectors
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5690.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5691.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5692.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5694.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5693.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5695.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5696.jpg)
I am picking up random parts as i shop around, this weekend i want to go to the junk yard and pick up a 8.8 rear end and i need to order a mini tub kit i want to fit some fat tire in the back
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks man i am going to keep it N/A for now
Picked up some parts: front cover, rear cover, lifter trays, most of the sensors, powerbound under drive pulley, steering wheel, ARP crank bolt
Picked up some parts: front cover, rear cover, lifter trays, most of the sensors, powerbound under drive pulley, steering wheel, ARP crank bolt
#7
9 Second Club
iTrader: (9)
Join Date: Apr 2011
Location: Indian Rocks Beach Fl
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
you should have no problem getting 10's. My car has 98 LS1, stock with only a very small cam, headers, yank converter, 3:73's and 235/60/15's drag radials it went 7:40's in the 1/8th w/1:68 60' car is not gutted at all. Full stock int and has Ice cold air and p/s and can be driven anywhere. All stock 4 cylinder stuff for suspension still. (thats next upgrade)
Trending Topics
#10
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
SoCal as well, are you planning on going to Invasion memorial day weekend?
Since i have the camaro and mustang i would like to swap wheels from one to the other, the rear end i want to get for the mustang will be the 8.8 and will order some Moser axle tubes with the GM bolt pattern 5x4 3/4"... I am trying to see which carrier to go with i would like the trac lok... what carrier are you 8.8 guys using?
Since i have the camaro and mustang i would like to swap wheels from one to the other, the rear end i want to get for the mustang will be the 8.8 and will order some Moser axle tubes with the GM bolt pattern 5x4 3/4"... I am trying to see which carrier to go with i would like the trac lok... what carrier are you 8.8 guys using?
#12
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I haven't, that's a good idea tho I will do that thanks!
I picked up a 8.8 rear end today i will order some axles for it and gears and also a cover, i want to get some disc brakes for it also
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5713.jpg)
I picked up a 8.8 rear end today i will order some axles for it and gears and also a cover, i want to get some disc brakes for it also
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5713.jpg)
![](http://i934.photobucket.com/albums/ad184/Turbobuild/notch/IMG_5712.jpg)
#13
9 Second Club
iTrader: (9)
Join Date: Apr 2011
Location: Indian Rocks Beach Fl
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
just remember what length axles you will need. stock 79-93 length is a little harder for back discs but can be done while 94 and up are real easy to do discs but at an expense of 3/4" longer axles per side. (5 lug)
#20
11 Second Club
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i have the 93 cobra 4 lug rear disk and brackets and rotors pads and e brake cables. all you would need is the brackets from north race cars. lmk if interested, i went to 5 lug with mine