Can't find pcm
Can't find pcm Just pulled an lq9 out of what I assume is a 2003 escalade. Truck was an insurance car and most of it was burnt. The motor and the majority of the wiring is ok. The car came to me from a body shop and most of the panels have been stripped off. Is the module I have pictured the pcm? I cant find any pcm that looks like that but it does line up with all of the engine wiring. If its not the pcm maybe sombody took it?
Also is that the VIN on the back of the module? If not where can I find the VIN? The doors are gone so I cant get it off the sticker. All of the glass is gone so if it was etched those are gone to. I heard sometimes they are in the glovebox but I have no glovebox. The windshield VIN is burnt. Is it etched into the frame or put on to the motor or transmission anywhere?
Also is that the VIN on the back of the module? If not where can I find the VIN? The doors are gone so I cant get it off the sticker. All of the glass is gone so if it was etched those are gone to. I heard sometimes they are in the glovebox but I have no glovebox. The windshield VIN is burnt. Is it etched into the frame or put on to the motor or transmission anywhere?
That is the PCM. Take a look at this http://cgi.ebay.com/ebaymotors/Engin...-/270701105232
The VIN can be pulled from the PCM with the proper software. Otherwise you will have to hunt it down from the body shop, the body itself or the paperwork,
The VIN can be pulled from the PCM with the proper software. Otherwise you will have to hunt it down from the body shop, the body itself or the paperwork,
Looks like it had a 6 speed automatic transmission as well which would have been an Escalada or Denali. Definitely a 2007 as stated previously.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Take a look at the vertical surface at the dr rear side of the block, at the trans flange.
If the trans and engine are a matched set, the vin may also be stamped, [laser etched], on the bellhsg flange on the dr side.
If the trans and engine are a matched set, the vin may also be stamped, [laser etched], on the bellhsg flange on the dr side.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
