Diesel Trans Am?
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You probably can, but I would think the T-56 would be shredded by the torque without some serious beefing up. Then you'll also need a clutch to hold it. Lots of people have swapped Duramax engines into cars, but I think they usually use the transmission that comes with it. Do a search on YouTube for Duramax Chevelle.
FYI, the engine is HUGE. Bolting it up is one thing. Physically getting it in the car is another.
FYI, the engine is HUGE. Bolting it up is one thing. Physically getting it in the car is another.
#5
Staging Lane
Join Date: Jun 2008
Location: Down South
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You probably can, but I would think the T-56 would be shredded by the torque without some serious beefing up. Then you'll also need a clutch to hold it. Lots of people have swapped Duramax engines into cars, but I think they usually use the transmission that comes with it. Do a search on YouTube for Duramax Chevelle.
FYI, the engine is HUGE. Bolting it up is one thing. Physically getting it in the car is another.
FYI, the engine is HUGE. Bolting it up is one thing. Physically getting it in the car is another.
On another subject, anyone wanna buy a rust-free 79 in project condition?
![Secret2](https://ls1tech.com/forums/images/smilies/LS1Tech/secret.gif)
Trending Topics
#9
#14
TECH Resident
iTrader: (7)
Join Date: Dec 2008
Location: Greenville,SC
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
One guy put a GM 6.5 in a camaro. Here is the video.
http://www.youtube.com/watch?v=FHfx-..._order&list=UL
http://www.youtube.com/watch?v=FHfx-..._order&list=UL
#15
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The ignorance of diesel is strong in this thread, luke skywalker.
The Duramax weighs about 840lbs. An 8.1L big block weighs 865lbs. Iron LT1 weighs about 500lbs....a Duramax isn't *that* heavy.
Duramax uses a standard V8 Chevy bolt pattern, so a T56 will bolt up. It should do a decent job of handling the power, with the right clutch. Most Duramax stick shift trucks came with a shitty dual-mass flywheel from the factory, so that is something to watch out for. The real trans. killer with diesels is low-RPM impulse torque.
The allison is huuge, it won't fit in most car/Dmax swaps, and takes a 2" body lift to fit it in a stock Silverado, so a TH400, built 'glide, or maybe a built 4L80E would be better, depending on what you want to do with the car.
The engine is wide as *** too, it has 4 valves per cylinder. Everything else might not be an issue if you can't squeeze the engine in the car.
The Duramax weighs about 840lbs. An 8.1L big block weighs 865lbs. Iron LT1 weighs about 500lbs....a Duramax isn't *that* heavy.
Duramax uses a standard V8 Chevy bolt pattern, so a T56 will bolt up. It should do a decent job of handling the power, with the right clutch. Most Duramax stick shift trucks came with a shitty dual-mass flywheel from the factory, so that is something to watch out for. The real trans. killer with diesels is low-RPM impulse torque.
The allison is huuge, it won't fit in most car/Dmax swaps, and takes a 2" body lift to fit it in a stock Silverado, so a TH400, built 'glide, or maybe a built 4L80E would be better, depending on what you want to do with the car.
The engine is wide as *** too, it has 4 valves per cylinder. Everything else might not be an issue if you can't squeeze the engine in the car.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#17
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You could track down the truck 6 speed if you've got really deep pockets.. I can't remember the model designation but it's a ZF something or other. They were behind duramaxes for a few years and the 8.1 liters. But from what I hear, that transmission is huge so I doubt you could fit it into an Fbody.
#19
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The ignorance of diesel is strong in this thread, luke skywalker.
The Duramax weighs about 840lbs. An 8.1L big block weighs 865lbs. Iron LT1 weighs about 500lbs....a Duramax isn't *that* heavy.
Duramax uses a standard V8 Chevy bolt pattern, so a T56 will bolt up. It should do a decent job of handling the power, with the right clutch. Most Duramax stick shift trucks came with a shitty dual-mass flywheel from the factory, so that is something to watch out for. The real trans. killer with diesels is low-RPM impulse torque.
The allison is huuge, it won't fit in most car/Dmax swaps, and takes a 2" body lift to fit it in a stock Silverado, so a TH400, built 'glide, or maybe a built 4L80E would be better, depending on what you want to do with the car.
The engine is wide as *** too, it has 4 valves per cylinder. Everything else might not be an issue if you can't squeeze the engine in the car.![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
The Duramax weighs about 840lbs. An 8.1L big block weighs 865lbs. Iron LT1 weighs about 500lbs....a Duramax isn't *that* heavy.
Duramax uses a standard V8 Chevy bolt pattern, so a T56 will bolt up. It should do a decent job of handling the power, with the right clutch. Most Duramax stick shift trucks came with a shitty dual-mass flywheel from the factory, so that is something to watch out for. The real trans. killer with diesels is low-RPM impulse torque.
The allison is huuge, it won't fit in most car/Dmax swaps, and takes a 2" body lift to fit it in a stock Silverado, so a TH400, built 'glide, or maybe a built 4L80E would be better, depending on what you want to do with the car.
The engine is wide as *** too, it has 4 valves per cylinder. Everything else might not be an issue if you can't squeeze the engine in the car.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#20
TECH Senior Member
iTrader: (127)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Is there a reason u want a diesel? I work on diesel vehicles and equipment for a living.but I would not bother retrofitting a large diesel in a car. If tq is wut u seek, a big block will pretty much drop in ur ta, bolt up to a LT1 type t56.
I'm sure that big block motor will be more than adequate. And lower priced than a diesel
I'm sure that big block motor will be more than adequate. And lower priced than a diesel
![Burnout](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_burnout.gif)