Not another 240sx build...
Thread Starter
Teching In
Joined: Jun 2011
Posts: 23
Likes: 0
From: New Jersey
Not another 240sx build... well gents. iv been working on this 240sx i got as a payment for a drift car build i did for someone and iv finally gotten to the point where i can start posting up some progress. the car was pretty much dead bone stock right down to the air box intake. so we started off with stripping the car completely right down to the sheet metal. im shooting for 2200hp alot of you will laugh thats fine, i do this for a living though and 2200 really is nothing to me when you see 6000+hp cars pull into the shot every day. so anyways we began the stripping process.
the car on the left is the one being used in this project.
dont worry that body kit is long gone!
i was absolutely amazed when i saw there was almost no rust on this s13 chassis as they are highly known for that in my area with the harsh winters
basically you wont be seeing the motor until next season. my goals are as followed, build the chassis first (expected to be done by the beginning of 2012 season) then build the motor (expected to be done by the end of the 2012 season) then rip the entire thing apart and send it off to paint. (expected to be done for the first burnout of the 2013 season) unfortunately this is not a customer car so i cannot work on it whenever i need to. between working my full time day job and my nights and weekends out of my own shop ill need to find the time to stick a few late nights here and there to get this baby cooking the tires off sooner then later. honestly i can have the hole car done in about 4 weeks front start to finish but between bills time and beer thats just not possible. so sit back and enjoy this longer then normal term relaxed top sportsman build!
the car on the left is the one being used in this project.
dont worry that body kit is long gone!
i was absolutely amazed when i saw there was almost no rust on this s13 chassis as they are highly known for that in my area with the harsh winters
basically you wont be seeing the motor until next season. my goals are as followed, build the chassis first (expected to be done by the beginning of 2012 season) then build the motor (expected to be done by the end of the 2012 season) then rip the entire thing apart and send it off to paint. (expected to be done for the first burnout of the 2013 season) unfortunately this is not a customer car so i cannot work on it whenever i need to. between working my full time day job and my nights and weekends out of my own shop ill need to find the time to stick a few late nights here and there to get this baby cooking the tires off sooner then later. honestly i can have the hole car done in about 4 weeks front start to finish but between bills time and beer thats just not possible. so sit back and enjoy this longer then normal term relaxed top sportsman build!
Thread Starter
Teching In
Joined: Jun 2011
Posts: 23
Likes: 0
From: New Jersey
pulled the ka24de out of it and the real work begins.
here is the 12 point sportsman cage all moly with light weight funny car conversion i made at work.
here is a few tubes tacked up the chassis is dam there close to finished being fitted as we speak but ill let the suspense kick in.
here is the 12 point sportsman cage all moly with light weight funny car conversion i made at work.
here is a few tubes tacked up the chassis is dam there close to finished being fitted as we speak but ill let the suspense kick in.
Thread Starter
Teching In
Joined: Jun 2011
Posts: 23
Likes: 0
From: New Jersey
few more for ya'll.
then i began doing the front suspension setup i wanted to keep the stock location for the towers so i jiged them up so they couldnt move and removed the junk and installed the front support tubes then fabbed up some plates for the towers and welded them in.
then i began doing the front suspension setup i wanted to keep the stock location for the towers so i jiged them up so they couldnt move and removed the junk and installed the front support tubes then fabbed up some plates for the towers and welded them in.
Trending Topics
Thread Starter
Teching In
Joined: Jun 2011
Posts: 23
Likes: 0
From: New Jersey
yea there really isnt much 240 left lol pretty much just the body and some of the cabin floor the rest was sold off and paid the remainder of his bill then i had the shell left over. yea iv been around the fab train once or twice i do it for a living so i get alot of practice at work.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
