Mustang and AJE users come in please
Mustang and AJE users come in please Hey guys, do you have to use the AJE a-arms with the k member? Im assuming it would be the same for all years, just curious.
Going in a New Edge...
Thanks.
Going in a New Edge...
Thanks.
Last edited by JAX04; Dec 2, 2011 at 09:33 PM.
I did email. Them last night. However, i felt the need to ask on here, as their is a good chance, i would forget about it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo You make me laugh....
Dont come into someone thread at 1030 at night asking them to call someone. i wouldve. Like i said, i did email them.
Thanks for the responses guys.
They confirmed as well. They wrote me back this morning.
My 1999 is on its way here right now. Guy is delivering it. Straight body, blown motor, v6 car. Once i get some good progress under way, ill be making a thread, maybe ill actually get to keep this car and finish this build. RX7 went away last night, for those that were following that slow build. guy came and picked it up. But new car will be here within the hour...
Dont come into someone thread at 1030 at night asking them to call someone. i wouldve. Like i said, i did email them.
Thanks for the responses guys.
They confirmed as well. They wrote me back this morning.
My 1999 is on its way here right now. Guy is delivering it. Straight body, blown motor, v6 car. Once i get some good progress under way, ill be making a thread, maybe ill actually get to keep this car and finish this build. RX7 went away last night, for those that were following that slow build. guy came and picked it up. But new car will be here within the hour...
Did you use factory style spring and struts seprate from each other or coil overs?
Im gonna be pulling mine out tomorrow in preperation for the K memeber arriving. From 3pm today, i had a full car, now its half a car, lol.
TECH Regular
Joined: Oct 2009
Posts: 482
Likes: 0
From: Whitehall,PA
Don't forget about sub frame connectors, you're gonna need them! Mine also was a V6 car and I put in UMI full length SFC's and welded up the torque boxes. I assume you plan on replacing the 7.5" rear?
SFC's, i wasnt aware that i would need them, thanks for the heads up man, i appreciate it. lol
Most def dont plan on re-using the 7.5 rear. Ive been keeping my eyes open for a used 8.8 factory or already built, on ebay, bullet, racing junk, etc. Sucks, 2 months ago, when i was working on the RX7 i could find 8.8 rear ends like they were going out of style, funny, the moment i need to find one, i can't. lol.
I dont know a whole lot about the mustang as of yet, ive been reading alot and learning what i can where i can, lol. Ive got a long way to go.
Got the car in yesterday, it was complete car. by 11pm last night, the doors were out, front end torn down and motor removed. lol. Now the waiting game starts. waiting on parts.
Do you have any build pics of your setup?
Most def dont plan on re-using the 7.5 rear. Ive been keeping my eyes open for a used 8.8 factory or already built, on ebay, bullet, racing junk, etc. Sucks, 2 months ago, when i was working on the RX7 i could find 8.8 rear ends like they were going out of style, funny, the moment i need to find one, i can't. lol.
I dont know a whole lot about the mustang as of yet, ive been reading alot and learning what i can where i can, lol. Ive got a long way to go.
Got the car in yesterday, it was complete car. by 11pm last night, the doors were out, front end torn down and motor removed. lol. Now the waiting game starts. waiting on parts.
Do you have any build pics of your setup?
TECH Regular
Joined: Oct 2009
Posts: 482
Likes: 0
From: Whitehall,PA
I do have some build pics that I need to upload, nothing fancy I definitely built it on a budget. Car is extremely fun to drive! I would also suggest some decent lower rear control arms to avoid wheel hop. I picked up a set of Roush's off ebay cheap.
Got another question for you guys. Since both the New edge and the fox users have responded. Maybe you can answer 2 more questions for me.
Ill ask the second one if this one is a yes.
On AJE's website, they list the Kmember for 79-04 "universal". Since i have not purchased one, and found one local to me, More local then AJE, lol, they are about an hour away.
Anyway, are they really all the same? The one the lister is selling is the universal part number, and out of a fox body. I know it says its universal, and is listed for 79-04, and this is probably about the dumbest question, but they are exactly the same? I didnt know if maybe you had to specify year when ordering through AJE. I know thats ignorant. I just couldnt help but think their is differences between the years...
Ill ask the second one if this one is a yes.
On AJE's website, they list the Kmember for 79-04 "universal". Since i have not purchased one, and found one local to me, More local then AJE, lol, they are about an hour away.
Anyway, are they really all the same? The one the lister is selling is the universal part number, and out of a fox body. I know it says its universal, and is listed for 79-04, and this is probably about the dumbest question, but they are exactly the same? I didnt know if maybe you had to specify year when ordering through AJE. I know thats ignorant. I just couldnt help but think their is differences between the years...
Got another question for you guys. Since both the New edge and the fox users have responded. Maybe you can answer 2 more questions for me.
Ill ask the second one if this one is a yes.
On AJE's website, they list the Kmember for 79-04 "universal". Since i have not purchased one, and found one local to me, More local then AJE, lol, they are about an hour away.
Anyway, are they really all the same? The one the lister is selling is the universal part number, and out of a fox body. I know it says its universal, and is listed for 79-04, and this is probably about the dumbest question, but they are exactly the same? I didnt know if maybe you had to specify year when ordering through AJE. I know thats ignorant. I just couldnt help but think their is differences between the years...
Ill ask the second one if this one is a yes.
On AJE's website, they list the Kmember for 79-04 "universal". Since i have not purchased one, and found one local to me, More local then AJE, lol, they are about an hour away.
Anyway, are they really all the same? The one the lister is selling is the universal part number, and out of a fox body. I know it says its universal, and is listed for 79-04, and this is probably about the dumbest question, but they are exactly the same? I didnt know if maybe you had to specify year when ordering through AJE. I know thats ignorant. I just couldnt help but think their is differences between the years...
I ordered mine directly from AJE, they never asked what year car it was going into. Mine is a 95 and it fit, not perfect, but the car has 120K on it and isn't perfect. I don't think ford changed the front end geometry for 25 years, thats gotta be some sort of record.
Plus, their has got to be some weight savings, right?
Im thinking i might just order the kit he offers with the coilovers, k member, a arms, mounts and trans mount. Just knock it all out at once. he's 1.5 hours south of me, i might just drive down their today.