GNIUS's LS6 G35 Build
#22
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Cincinnati, OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
I am going to get a full custom harness made by chasebays. But yes you are right. I just couldnt find any info on using ls2 knock sensors with the older ecu. So I was just planning on using an E40 ecu from an 05 GTO thats set up for the 24x reluctor. I might hit you up on the extra wiring stuff especially with the ecu so I know what is going on with the wiring.
#23
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Cincinnati, OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Yeah about 15% of 01 fbodies had LS6 blocks. I was as surprised as you. When I was reading up on the blocks I just checked it for ***** and giggles and it was labeled with the LS6 casting numbers. Anyways, I would say the block cleaned up nice.
#26
Let me know if you need any of the swap parts for this swap. I know you have already talked to logan Brew_haha on my350z and g35 driver. We carry sikky, fueled racing and all of the chasebays wiring harnesses, fuel line kits, and power steering kits.
Great looking build by the way glad to see more of these popping up.
Great looking build by the way glad to see more of these popping up.
#27
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Cincinnati, OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
All my timing components in!! And my E40 ecm!! I am going to install them this weekend.
C5R Timing Chain and Crank Turning Tool (This is a godsend!!)
Custom ground EPS 226/230 .600" lift cam.
C5R Timing Chain and Crank Turning Tool (This is a godsend!!)
Custom ground EPS 226/230 .600" lift cam.
#28
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Cincinnati, OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Let me know if you need any of the swap parts for this swap. I know you have already talked to logan Brew_haha on my350z and g35 driver. We carry sikky, fueled racing and all of the chasebays wiring harnesses, fuel line kits, and power steering kits.
Great looking build by the way glad to see more of these popping up.
Great looking build by the way glad to see more of these popping up.
#29
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Cincinnati, OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Time for an update. Got the timing stuff all installed!!
The new cam, all lubed up and only one place to go...
It went in so good!!
Rear Seal and Rear Cover are in!!
I was interrupted by the mail man. He had a present for me!! Timing chain damper came in!!
Cam retainer plate is in and I drilled and tapped the block for the new timing chain damper!!
Cam timing mocked up. Dot to dot. Pretty simple.
Timing gear, C5R chain, and timing chain damper installed!!
All done for today. Short block is almost done!! Just need an oil pump and front cover.
The new cam, all lubed up and only one place to go...
It went in so good!!
Rear Seal and Rear Cover are in!!
I was interrupted by the mail man. He had a present for me!! Timing chain damper came in!!
Cam retainer plate is in and I drilled and tapped the block for the new timing chain damper!!
Cam timing mocked up. Dot to dot. Pretty simple.
Timing gear, C5R chain, and timing chain damper installed!!
All done for today. Short block is almost done!! Just need an oil pump and front cover.
#33
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Cincinnati, OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
I am going with 243 heads as of right now. I am waiting on some carbide burrs to do some light port and polishing on.
Thanks!! I totally agree. Have always wanted to build a motor. Maybe more now since I have all the tools
I am waiting on a few parts and tools right now. I did some prep work for paint on the intake manifold. So its coming along. Should have a decent update with pics soon.
I also need some opinions on colors for the heads and valve covers. I am torn between colors cast iron and aluminized. I did a color swatch for the cast iron and will do the aluminized tonight and post it tomorrow for input.
Thanks!! I totally agree. Have always wanted to build a motor. Maybe more now since I have all the tools
I am waiting on a few parts and tools right now. I did some prep work for paint on the intake manifold. So its coming along. Should have a decent update with pics soon.
I also need some opinions on colors for the heads and valve covers. I am torn between colors cast iron and aluminized. I did a color swatch for the cast iron and will do the aluminized tonight and post it tomorrow for input.
#36
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Cincinnati, OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the lack of updates, I have been working alot and in process trying to sell my housing and move down to NC. But here is where I am at.
Melling oil pump came in:
Oil pump installed:
LS2 Front cover and cam sensor came in:
LS7 and new LS2 lifter treys with hole mod lubed and prepped for install:
LS2 Timing cover, LS7 lifters and guides installed!
PSI Springs just came in:
Yeah, I have since sold my old G35 parts and have decided porting is a bitch and I dont want to screw it up cuz I dont have a flow bench. I have decided to go with sending my 243 heads to Advanced Induction.
LS2 intake and LS2 heads are interchangeable and they are still cathedral ports LS3-LS7 are the rectangle ports.
Melling oil pump came in:
Oil pump installed:
LS2 Front cover and cam sensor came in:
LS7 and new LS2 lifter treys with hole mod lubed and prepped for install:
LS2 Timing cover, LS7 lifters and guides installed!
PSI Springs just came in:
Yeah, I have since sold my old G35 parts and have decided porting is a bitch and I dont want to screw it up cuz I dont have a flow bench. I have decided to go with sending my 243 heads to Advanced Induction.
LS2 intake and LS2 heads are interchangeable and they are still cathedral ports LS3-LS7 are the rectangle ports.
Last edited by GNIUS; 08-16-2012 at 07:05 AM.
#37
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Cincinnati, OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
I also sold the G and bought a new 2012 Ram 4x4. Back to driving a V8 and the RamBox bed is the ****!! I really needed a parts getter. So Project G35 is done but I am still continuing with the build. I am now starting to look for a mid 60s kit car for an LS swap or factory five kit car!!
Also, I found a sweet deal on a busted T56!! The syncros between 2-3 are gone. I am now procuring parts for a viper T56 spec build.
Also, I found a sweet deal on a busted T56!! The syncros between 2-3 are gone. I am now procuring parts for a viper T56 spec build.
Last edited by GNIUS; 08-15-2012 at 09:15 PM.
#39
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Cincinnati, OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
It was a tough choice, but I needed something reliable in the midterm. And every time I talked my old man, he kept making fun of me for wanting to swap a American motor into a Japanese car. So now I am on the hunt for a new chassis.