Sarg

iTrader: (6)

Going to bump it up any or just happy with what you got?

LILHEMI

im not pushing this motor any harder. i was hoping to run 8s on it but with these 862 heads and my elevation i just dont think its going to happen. i got a line on some 245 AFR heads for my 408. im pretty sure i can make some serious power with that combo haha

Clean94Z

iTrader: (5)

Rolling out man!!! Holy crap where were you at 7000DA!!

LILHEMI

fallon nv

Clean94Z

iTrader: (5)

DAMN!!! What the closet track too you?

LILHEMI

fallon nv lol

LILHEMI

got some wheels up action going on. not bad for my 3rd time out. this was the 1.36 60'

BSmiff

Subscribed. That bitch is ridin. You should be well into the 8s with the 408.

LILHEMI

dropped my block and rotating assembly off at the machine shop this morning. they said a week. i got a pair of 317s with only 28k miles on them from a buddy. going to run them until i can afford some baller heads. im literally a set of head studs, a cam, and head gaskets ($800)from having this new 408 in the car. with my 92mm wheel it should spool INSTANTLY. i dont foresee any backpressure problems until 20+ psi. thats still pushing 1000whp so we shall see.

LILHEMI

soon..............

Rpayne41985

iTrader: (12)

cant wait to see the results

LILHEMI

took the heads to the machine shop to get the dual spring kit installed and they ended up giving it a valve job as it wasnt sealing well. i present to you my almost complete longblock.

im ordering my cam next week. trying to talk my nephew into trading me his S480 96mm turbine 1.32 housing for my S480 92mm 1.10 housing so i dont visit backpressure central at higher boost.

Sarg

iTrader: (6)

Think you will be fine regardless. I mean is is only 4 mm...

LILHEMI

well i hope so but im pushing it lol

LILHEMI

lost 2nd gear. tranny gets to come back out again.

The Guy in MY 99TA

call rossler and tell em to send you a tranny!

Bowtiedford

iTrader: (9)

1:30 territory, thats great, what rear setup do you have?

LILHEMI

teamz series 1. strange SA shocks and stock springs with one coil cut off.

Bowtiedford

iTrader: (9)

gotta love the Mustang platform, suspension works good.

Sarg

iTrader: (6)

Did you not have any issues with the tire hitting the top of the inner fender well with 1 spring cut? Mine does not touch, but it does not take much weight on it for it to do so. I am a little concerned that when I get good weight transfer it will scrub badly.