93 POS notchback build
#422
8 Second Club
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
so all parts to fix my tranny are ordered as well as a billet PTC 9.5"
![](http://i7.photobucket.com/albums/y287/hairynuts32/trannyfix_zps5453d0e7.jpg)
i finally put a proper tach in the car. no more rev limiter shifts.
![](http://i7.photobucket.com/albums/y287/hairynuts32/gauges_zps90583a0b.jpg)
and finally i ran across a smoking deal on an unmolested LQ4 block with brand new ARP main studs in it for $350. i scooped that **** up and bought a 408 callies/wiseco rotating assembly for it.
![](http://i7.photobucket.com/albums/y287/hairynuts32/racemotor_zpse68dd0de.jpg)
![](http://i7.photobucket.com/albums/y287/hairynuts32/rotatingassembly_zps25282fc5.jpg)
time will tell if my turbo is too small for the 408. if it is its a simple matter to go bigger.
![](http://i7.photobucket.com/albums/y287/hairynuts32/trannyfix_zps5453d0e7.jpg)
i finally put a proper tach in the car. no more rev limiter shifts.
![](http://i7.photobucket.com/albums/y287/hairynuts32/gauges_zps90583a0b.jpg)
and finally i ran across a smoking deal on an unmolested LQ4 block with brand new ARP main studs in it for $350. i scooped that **** up and bought a 408 callies/wiseco rotating assembly for it.
![](http://i7.photobucket.com/albums/y287/hairynuts32/racemotor_zpse68dd0de.jpg)
![](http://i7.photobucket.com/albums/y287/hairynuts32/rotatingassembly_zps25282fc5.jpg)
time will tell if my turbo is too small for the 408. if it is its a simple matter to go bigger.
#431
8 Second Club
Thread Starter
#434
8 Second Club
Thread Starter
#440
8 Second Club
Thread Starter