Ls_Nova

iTrader: (1)

Rite on bad ***....can't wait to start my build..

99Ls1fever

iTrader: (3)

Question for yeah I watched the video and didnt hear a 2step, are you brake boosting or how are you going about getting the turbo spooled up off the line? Cause coming off a trans brake is like being in nuetrul and there is no load to help spool the turbo?

You might have touched on this but what ecu are you running a Factory gm computer or BS3 Holley?

86lxnotch

iTrader: (3)

running a dfi gen 7 and msd for the ignition,the msd 2 step is pretty soft imo and i have it wired with my trans brake. the trans brake locks first and reverse together and loads the engine

Here's the official "first start":


Then a little idle video of it once the cooling system was bled:

Sarg

iTrader: (6)

What is the high pitched whine? Fuel pump?

86lxnotch

iTrader: (3)

yes, weldon 2035

Builtz71

iTrader: (4)

That thing is a beast!

99Ls1fever

iTrader: (3)

Do you have a bump box on the transbrake/ 2step?

86lxnotch

iTrader: (3)

No bump box, I pre stage at 1/4 throttle, once I'm in I floor it and bump in then grab the brake

99Ls1fever

iTrader: (3)

I see, very bad *** ride! how are you overall liking it so far? How many degrees of timing are you running on E85 and what kind of #'s did you pick up on the switch if you have a before and after?

86lxnotch

iTrader: (3)

Haven't gone e85 yet, still pumpgas with just the front mount cooler.... I love it so far lol

99Ls1fever

iTrader: (3)

Whats the ultimate power goals you are looking to get out of this combo? And what class are you running in x275? 10.5 ?

86lxnotch

iTrader: (3)

No real goal, no class. Just a fun toy

Camaro9969

iTrader: (12)

That sounds so sick!!

86lxnotch

iTrader: (3)

well i have 15 gallons of E85 in the garage and a appt at 10am monday morning with my buddy Frank at PSI speed solutions for some fun......goal is 650-700rwhp

99Ls1fever

iTrader: (3)

**** it will do that with its eyes closed! I picked up almost 60hp switching to E85 on Pump Gas.

How many lbs are you going to tune it on?

86lxnotch

iTrader: (3)

im hoping so. i dont wanna over estimate and be disappointed AND im still on stock gaskets and TTY headbolts lol

99Ls1fever

iTrader: (3)

If I lived by you, I would say lets throw the head bolts in tonight! I already did a set on a common rail Cummins today

I want to say my buddy was putting down 641hp on stock tty and gaskets for over 1 year before the piston rings went...

86lxnotch

iTrader: (3)

if i had them they would be in already haha.

99Ls1fever

iTrader: (3)

Lol! How many lbs are you going to run? 10-12?

86lxnotch

iTrader: (3)

my new tru boost saw 16.2 lbs before the cam so ill start there lol